Vi.d) Language; Vi.e) Display Contrast; Vi.g) Software Version; Fitter's Menu - Polypipe UFH8ZMP User Manual

• Registration
A temperature sensor or room regulator should be registered in each zone. In order to
register the sensor, go to sensors option. In order to register the actuators, go to Register
valve option.
VI.d) Language
This option is used to select the language version.
VI.e) Display contrast
This option is used to adjust the display contrast to individual user's needs.
VI.f)

Fitter's menu

The Fitter's Menu is intended to be operated by people with appropriate qualifi cations and
is used primarily to adjust the controller's additional functions.
Internet module
UFH8ZMP controller may cooperate with the Internet module which enables the user to
view and adjust certain parameters via the Internet. Such online control is possible only
after purchasing and connecting an additional module.
The Internet module may be connected to UFH8ZMP via RS cable. After it has been
connected, select Registration. The controller generates a code which the user should enter
on the Internet website. Detailed description of the procedure is available in the Internet
module instruction manual.
Internet module is a device enabling the user remote control of the regulator via the
Internet. The user controls the status of all valves on the home computer screen.
After switching the module on and selecting DHCP option, the controller automatically
downloads such parameters as IP address, IP mask, gateway address and DNS address
from the local network. If any problems arise when downloading the network parameters,
they may be set manually. The procedure of obtaining these parameters is described in
detail in the instruction manual of the Internet Module
Time
This option is used to set current time.
Date
This option is used to set current date
VI.g) Software version
When this option is selected, the display shows the logo of the CH boiler manufacturer and
the controller software version.
19
UFH8ZMP