Turn The Camera On; Set The Date And Time - Canon PowerShot SX710 HS Getting Started

Check your card's write-protect
6
(1)
switch and insert the memory
card.
Recording is not possible on memory
(2)
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
Insert the memory card with the terminals
(2) facing as shown until it clicks into place.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
Close the cover.
7
( 1 )
Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
( 2 )
position (2).
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.

Turn the camera on.

8
Press the ON/OFF button.
The [Date/Time] screen is displayed.

Set the date and time.

9
Press the [ ][ ] buttons to choose an
option.
Press the [ ][ ] buttons or turn the [ ]
dial to specify the date and time.
When finished, press the [ ] button.
Initial Preparations
5