Remote Control; Cablecard - Sony GRAND WEGA KDF-42WE655 Operating Instructions Manual

Remote Control
Remote control does not The batteries could be weak. Replace the batteries.
operate Check the orientation of the batteries.
Press once, and the TV indicator lights up. You may have
inadvertently pressed , which changes the remote
control to SAT or CABLE mode.
Make sure this unit's power cord is connected securely to the wall outlet.
Locate the unit at least 3-4 feet away from fluorescent lights.
Cannot change channels with If you are using the LCD projection TV to change channels, first press
the remote control once, and the TV indicator lights up.
If you are using another device to change channels, be sure you have not
inadvertently switched your LCD projection TV from the channel 3 or 4 setting.
Use the option to "fix" the channel based on the hookup you nsed
(see page 106).
If you are using another device to change channels, be sure to press
for that device. For example, if you are using your cable box to change channels,
be sure to press once, and the SAT/CABLE indicator
lights up.
Remote control does not If you replaced the batteries to the remote recently, the code numbers for the video
operate non-Sony video equipment may need to be reset.
equipment There may be more than one code for the equipment that you are attempting to
operate.
There is a possibility that some non-Sony equipment cannot be operated by your
Sony LCD pro}ection TV remote. You may need to use the equipment's original
remote control.
CableCARD
Problems using CableCARD or Check that the CableCARD is inserted properly (see pages 56-57).
CableCARD services The CableCARD nmst be activated by your local cable TV provider before you can
receive digital cable TV services. See the activation instructions on pages 56-57.
Check the and menu options (see page 116). (This can
be useful in providing information to an authorized technician or repair person.)
Contact your cable TV provider.
120