Sony GRAND WEGA KDF-42WE655 Operating Instructions Manual page 8

Lcd projection tv
Hide thumbs Also See for GRAND WEGA KDF-42WE655:
Table of Contents

Advertisement

Although
the LCD projection
TV is made with high-
precision
technology,
black dots may appear or bright
points of light (red, blue, or green) may appear constantly
on the LCD screen.
This is a structnral
property
of the
LCD panel and is not a defect.
!
ili
ii
If direct sunlight
or other
strong illumination
shines
on the screen,
part of the screen may appear white
due to reflections
from behind
the screen.
This is a
structural
property
of the LCD proiection
TV.
Do not expose
the screen to direct illumination
or
direct sunlight.
The picture
quality
may be affected
by your viewing
position.
Sit at least approx.
5.9 or 6.6 ft. (1.8 or 2.0
m) for KDF-42WE655
or KDF-50WE655,
or
approx.
6.8 or 7 ft. (2.1 or 2.2 m) for KDF-55WF655
or KDF-60WF655
away from your LCD projection
TV, and within
60 ° of the vertical
and 130 ° of the
horizontal
viewing
area for KDF-42WE655
or KDF-
50WE655,
or within 55 ° of the vertical
and 125 ° of
the horizontal
viewing
area for KDF-55WF655
or
KDF-60WF655.
If you sit too close to the TV, you
may experience
eye strain. For the best picture
quality,
install your LCD projection
TV according
to
"Recommended
Viewing
Area"
on page 30.
When installing
your LCD pro}ection
TV against
a
wall, keep it at least 4 inches (10 cm) from the wall.
Avoid installing
the LCD pro}ection
TV near a
heater, etc.
i
il
Your LCD projection
TV uses a projection
lamp as
its light source.
It is time to replace
the lamp with a
new one (not supplied)
when:
• the lamp replacement
indicator
on the front panel
blinks in red,
• screen images
become
clark,
• no image appears
on the display
after prolonged
use.
In rare instances,
the bulb may pop inside the lamp
unit, but the lamp nnit is designed
to contain
all of
broken
glass pieces
inside the lamp unit. (See
"Replacing
the Lamp"
on page 16.)
When the lamp eventually
burns out, you may hear
a noticeable
pop sound.
This is normal
and is
inherent
in this type of lamp.
This LCD projection
TV nses a cooling
fan. You
may hear the noise of fan running,
depending
on the
placement
of your LCD projection
TV. The noise
may be more noticeable
during the night or when the
background
noise level is low.
l)
Read these instrnctions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatns
near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation
openings.
Install in
accordance
with the manufacturer's
instructions.
8)
Do not install near any heat sources
such as radiators,
heat registers,
stoves,
or other apparatus
(including
amplifiers)
that produce
heat.
9)
Do not defeat the safety purpose
of the polarized
or
grounding-type
plug. A polarized
plug has two blades
with one wider than the other. A grounding
type plug
has two blades and a third grounding
prong. The wide
blade or the third prong are provided
for your safety.
If the provided
plng does not fit into your outlet,
consult
an electrician
for replacement
of the obsolete
outlet.
10) Protect
the power cord from being
walked on or
pinched
particularly
at plugs, convenience
receptacles,
and the point where they exit from the
apparatus.
11 ) Only use attachments!accessories
specified
by the
manufactnrel:
12) Use only with the cart, stand, tripod,
bracket,
or table specified
by the
manufacturer,
or sokt with the apparatus.
When a cart is used, use caution
when
moving
the cart/apparatus
combination
to avoid injury from tip-over.
13) Unplug
this apparatus
during
lightning
storms or
when unused
for long periods
of time.
14) Refer all servicing
to qualified
service
personnel.
Servicing
is required
when the apparatus
has been
damaged
in any way, such as power-supply
cord or
plug is damaged,
liquid has been spilled or objects
have fallen into the apparatus,
the apparatus
has been
exposed
to rain or moisture,
does not operate
normally,
or has been dropped.
15) Apparatus
shall not be exposed
to dripping
or
splashing
and no objects
filled with liquids,
such as
vases, shall be placed on the apparatus.
8

Advertisement

Table of Contents
loading

Table of Contents