Replacement Of Product - IBEX Westermo -RT-330-5G Series Manual

NOTICE
This product has integrated temperature sensors for monitoring the
internal device temperatures. If temperature limits are exceeded, alarms
are sent through the SW interface.
NOTICE
The operating conditions shall be ensured so that the normal operation
does not cause temperature alarms. Improve installation conditions or RF
parameters in case of any temperature alarms.

4.6. Replacement of Product

The device cannot be repaired. In case of a malfunction, it must be replaced.
Disconnect all cables and unscrew the product from the wall. Mount the replacement
product and reconnect all cables, observing the instructions in Connection of Cables.
MTTR (Mean Time To Repair), i.e. time for replacement of product is: < 10 minutes.
HOT SURFACE
Be aware that the surface of this product may become hot. When it is
operated at high temperatures, the external surface may exceed Touch
Temperature Limit according to the product's relevant electrical safety
standard.
This product complies with Touch Temperature Limits throughout its
operational temperature range.
24 Ibex-RT-330-5G Series