Led Indicators; Dimensions - IBEX Westermo -RT-330-5G Series Manual

NOTICE
Any unused antenna ports must be properly terminated with 50 Ohm,
otherwise the product might be damaged when power is applied to a
non-terminated antenna port.
NOTE
To ensure specified IP protection, suitable QMA connectors/cables and
terminations must be used.

3.5. LED Indicators

DC OPR ERR
Figure 5. LED indicators
LED Description
DC Power status
OPR Operation status
ERR Error status
X1 Ethernet status for X1 port
X2 Ethernet status for X2 port
Table 9. LED indicators
NOTE
Refer to management guide for detailed LED status indication.

3.6. Dimensions

Dimensions are stated in mm and are regardless of variants.
18
X1 X2
Ibex-RT-330-5G Series