Table of Contents
Advertisement
Using the built-in
light
Not_
• Tile built in light turns off automatically in the fbllowing cases:
When it stays on in the AUTO mode for more than 5 minutes
When you leave it on tbr more than 5 minutes with no cassette inserted or after the
tape has run out.
To turn the built in light on again, press LIGHT again.
• The battery pack is quickly discharging while the built in light is turned on. Turn it off
when
not
iifl
use.
• When you do not use your camcorder, turn the built in light off and remove the
battery pack to avoid turning on the built in light accidentally.
• When flickering occurs while shooting in the AUTO mode, press LIGHT tmtil the
_!tlli_lNindicator appears.
• The built in light may turn on/offwhen
you use the PROGRAM AE or backlight
t\mction while shooting in the AUTO mode.
• The built in light may be turned off when inserting or ejecting a cassette.
• While the end search t\mction is working, the built in light is turned off.
• When you use the conversion lens (optional), light ti"om the built in light is blocked
and may not illuminate the subject properly.
Use the Sony XB 3D halogen lamp (optional). The supplied halogen lamp is not on the
market. Purchase the Sony XB 3D halogen lamp.
Remove the power somce betiore replacing the bulb.
(1) Remove the built in light unit while pushing the hole under the built in light
unit using a wire.
(2) Turn the hull) housing counterclockwise
and detach from the built-in light
unit.
(3) Replace the bulb using a dry cloth.
(4) Attach the bulb housing turning it clockwise, then replace the built-in light
unit.
48
Advertisement
Table of Contents
