Aiwa LX-110 Operating Instructions Manual page 12

Compact disc stereo system
Table of Contents

Advertisement

RECEPTION OF *'TA STATIONS
To switch to the traffic announcements automatically as
soon as they begin
Keep the PTY button pressed until "TA ON" is
displayed, then release the button.
"TRAF" is displayed and the unit is set in the TA (traffic
announcements) standby mode.
When a TA code is received, it interrupts the FM reception and
the traffic announcement is made audible. At this time, "TRAF"
is blinking.
At the end of the traffic announcement, the previous FM station
is restored.
To restore the previous FM station during the traffic
announcement
Press the BIE
button. At this time, the TA standby mode is
canceled and "TRAF" goes off.
elf the I button is pressed, the previous FM station is not
restored although the TA standby mode is canceled. The FM
station broadcasting the current traffic anouncement stays
tuned.
To cancel the TA standby mode
Keep the PTY button pressed until "TA OFF" is displayed, then
release the button. "TRAF" goes off.
Radio text (**RT)
When the tuned station is transmitting RT codes, RT lights up.
At this time, press the RDS button once. RT flashes while text
scrolls on the display.
To return to the normal display, press the RDS button again.
RDS RT
If the tuned station is not transmitting RT codes, RT will not light
up. In this case, "NO RT" is displayed when you press the RDS
button.
Clock-time (*"CT)
The CT function provides the unit with information about the local
time. The CT function works whenever a CT station is received.
If you have not set the clock (the clock flashes on the
display)
The current time can be set automatically by tuning in to an RDS
station.
If no RDS station is preset, keep the kK
DOWN or >>I UP
button pressed until RDS lights up.
If the clock does not agree with the broadcast time
An RDS signal will update the clock time every hour on the hour
only ifthe set clock time is within RDS time by —2 minutes 59
seconds or +3 minutes 59 seconds.
11. EenGLisH
PR
*'Traffic announcement identification (TA)
This is a code which informs the receiver that ea tuned
station is currently broadcasting relevant local trffic and
travel information.
*8Radiotext (RT)
Information such as the cast list of a play or thetitle of a
song is shown on the display.
*Clock-time (CT)
CT function provides an accurate clock signal which is ©
self adjusting to time zones and seasonal time ch anges.
gee

Advertisement

Table of Contents
loading

Table of Contents