Table of Contents
Advertisement
RECORDING
™@ Recording
from the built-in CD player
(CD Synchronised Recording System)
The changes in the sound, that are due to adjustments of the graphic
equalizer, will be recorded just as you hear them. If you do not want
the graphic equalizer adjustments to effect the sound that is recorded,
press the SOURCE
DIRECT button to make the sound levels flat.
1 Press the CD button and load the CD to be recorded.
2 Load a cassette into the TAPE 2 cassette compartment.
@ Wind past the beginning part of the tape on which recording can
not be performed.
3 When recording with the Dolby NR system, set the DOLBY
NR switch to ON; if not, set it to OFF.
4 Set the REVERSE
MODE
switch to = to record on only
one side, or to => for continuous recording on both sides.
5 Press the REC PAUSE (@IN) button.
@ The RECORD indicator lights up and the DIRECT PLAY indicators
flash.
6 Press the DIRECT PLAY button on the CD.
To interrupt recording:
1 Press the PAUSE
button on the CD.
2 Press the DIRECT
PLAY
button
on the CD
to resume
recording.
To stop recording:
Press the M button on the tape.
(At this time, CD playback does not stop.)
E-26
Advertisement
Table of Contents
