NRS Healthcare P42809 User Instructions

P42809
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in a
safe place for future reference.
1.

INTENDED USE

The Folding EasyFit Bed Rail provides stable support to aid adult users (taller than 1.46m) transfer in and out of bed,
moving from a lying to a sitting position as well as assist user repositioning. This product is suitable for all sized divan
and framed beds, and can be fi tted to either side of the bed. Supplied with bed rail straps for additional security.
2.

SAFETY

318mm
Min
WARNING: To avoid possible entrapment, you must
always position the product a minimum of 318mm from
the headboard or footboard.
WARNING: To avoid possible entrapment, you must
always position the product a minimum of 318mm
from solid objects/furniture such as bedside drawers or
cabinets.
WARNING: The maximum user weight must not be more
than 127Kg (20st).
YOU MUST carry out a risk assessment to assess the
use and suitability of the bed rail in relation to the users
physical and cognitive ability, as well as the surrounding
environment.
DO NOT install this product to a damaged bed.
MAKE SURE there is no gap between the bed rail and
the mattress.
ALWAYS use the bed securing straps provided when
fi tting to a divan bed.
REGULARLY check the straps are tight and the device is
stable and fi rmly fi tted.
DO NOT fi t this product to medical or profi ling beds.
3.

UNPACKING

Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are missing or
damaged and do not try and assemble.
FOLDING EASYFIT BED RAIL
Folding EasyFit Bed Rail (with straps)
USER INSTRUCTIONS
Figure 1: EasyFit Bed Rail Assembly
3.1 Contents
Note: The Folding EasyFit Bed Rail is supplied pre-
assembled in the folded position.
1. Bed Rail Handle
2. Bed Rail Base
3. Plastic Wing-Nuts x 2
4.

ASSEMBLY

1. Refer to Figure 1. The bed rail handle (1) can be
rotated in both directions, please make sure it is in
the correct position for your installation.
2. Unscrew the two plastic wing-nuts (3), then remove
the two plastic saddle-washers (4) and the two
bolts (5).

4.1 Right-Hand Side Assembly

Headboard
4
5
1
Maximum User Weight
20st
127kg
2
1
3
4. Plastic Saddle-Washers x 2
5. Steel Bolts x 2
6. Bed Rail Straps
1
3
Figure 2: RHS Assembly
6
4
5
2
Footboard