NRS Healthcare P01304 User Instructions

P01304 350 mm (14") SPA Stainless Steel
Straight Grab Rail
P01316 480 mm (19") SPA Stainless Steel
Straight Grab Rail
P01328 620 mm (24.5") SPA Stainless Steel
Straight Grab Rail
General Safety Warning
Read and follow these instructions carefully.
Keep these instructions in a safe place for
future reference.
1. INTENDED USE
The SPA Grab Rail range provides a stable support
to assist users to raise and lower themselves,
and provides stability when overcoming everyday
obstacles.
Figure 1: Curved Rails
Figure 2: Straight Rails
USER INSTRUCTIONS
SPA GRAB RAIL RANGE
P01339
P01341
P01353
2. SAFETY
Warning: Do not exceed the Safe Working
Load.
• The person that installs this product must be
suitably qualified and competent.
• Use only as a support to assist movement. Do
not apply full weight to the rail.
• Never drill through pre-stressed concrete to
install a support rail.
• Always check for concealed electrical cables
and water pipes when installing.
• Check your legal requirements relating to earth
bonding of metal parts.
• Inspect product (to ensure the rail is unbroken,
rigid, stable, and that the fixings & screws are
fitted into place) at regular intervals. See section
5.2.
3. UNPACKING
Remove the packaging and check all parts
carefully. Contact your supplier immediately if
parts are missing or damaged and do not try and
assemble.
3.1 Contents:
1. Grab Rail
2. Cover Plate (pre-fitted)
3. Wall Bracket (pre-fitted)
Note: Fixings are not supplied.
1
350 mm (14") SPA Stainless Steel
Curved Grab Rail
480 mm (19") SPA Stainless Steel
Curved Grab Rail
620 mm (24.5") SPA Stainless Steel
Curved Grab Rail
Safe Working Load
30 st
190 kg