NRS Healthcare EASYFIT PLUS MK2 User Instructions

P63991

General Safety Warning

Please make sure that you read and follow these
instructions carefully. Failure to do so can result
in injury. Keep these instructions in a safe place
for future reference.

INTENDED USE

The EasyFit Plus Bed Rail MK2 provides stable support to aid user transfer in and out of bed, moving from
a lying to a sitting position as well as assist user repositioning.
Designed for use with most types of domestic beds including; divans with feet / castors, framed slatted beds
and electric profi ling beds.
Figure 1: EasyFit Plus Bed Rail MK2 (Tall)

SAFETY

WARNING To avoid possible head entrapment,
position the bed rail at least 320mm (12.5") away
from both headboard and footboard.
DO NOT exceed product Maximum User weight:
160Kg (25st).
ALWAYS ensure that the mattress is as close as
possible to the bed rail. Any gap could allow the
client to become wedged in-between.
DO NOT use on electrically height adjustable beds
unless the height adjustment function has been
disabled, as this could damage the bed rail and / or
the bed frame when operated.
ALWAYS ensure the bed rail is fi rmly clamped to the
bed frame. Check regularly to ensure the bed rail is
securely clamped.
USER INSTRUCTIONS
EASYFIT PLUS BED RAIL MK2
Standard P64004
Maximum User Weight
ALWAYS detach the handrail from the base before
carrying or storing the product.
NOT suitable for use by children.

UNPACKING

Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.

Contents:

1. Base Frame x 1
2. Handrail Assembly x 1
Recommended Bed Rail Heights
P64004 (Tall) for
beds heights more
than 600mm (24")
NRS recommends fi tting the standard bed rail
(P63991) on beds with a mattress height up to
600mm; for higher beds, the tall bed rail (P64004)
should be used.
1
Tall
25st
160kg
P63991 (Standard)
for beds heights less
than 600mm (24")