Advertisement
1. SETTING UP THE OOZE TUBE
CONTENTS
Test tube, lid, 2 corn starch packets
(10 g each), dye packet (1 g), cardboard
strip, stirring stick
YOU WILL ALSO NEED
Permanent marker, shallow bowl or pan,
water, scissors, paper towels, spoon
HERE'S HOW
1. Use the cardboard strip and lid to
make a test tube holder as shown.
Place the test tube into the holder.
2. Fill the test tube with 10 ml of water.
To measure this, use the test tube
guide printed on the panel to the
right to make marks on the test tube
at the 5-ml and 10-ml lines.
3. Open the dye packet with scissors.
Do not use your teeth.
1
3
2
Advertisement
