Basic Operation; Setting The Clock And Date - Philips AJ300DB - annexe 2 User Manual

Hide thumbs Also See for AJ300DB - annexe 2:
Table of Contents

Advertisement

BASIC OPERATION.

Switching on the system
• Press POWER.
™ The system will switch to the last selected source.
• Press TUNER/AUX or DOCK.
™ The system will switch to the selected source.
Switching the system to standby mode
• In any source mode, press POWER.
Switching off the volume temporarily
Press MUTE on the remote control to stop sound play-back instantly.
™ Playback will continue without sound and the display shows MUTE .
• To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Illumination brightness
Press REPEAT ALARM /
• The brightness of the display can be adjusted:
Bright

SETTING THE CLOCK AND DATE

1. In any mode, press and hold TIME SET until clock digits flashes.
2. Press 2; to select 12 Hours/ 24 Hours mode.
3. Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.
4. Press TIME SET to confirm.
™ The clock digits for the minutes flash.
5. Repeat the steps 3 - 4 until you complete all the other settings for minutes,
year, month and days.
BRIGHTNESS CONTROL
Low
Off
once or more.
Bright .

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj300db/05

Table of Contents