Display Controls - Hisense FV21C7HWE User's Operation Manual

Display Controls

Controlling the temperature
Use your appliance according to the
following control regulations, your
appliance has the corresponding functions
as the control panels showed in the
pictures above.
Caution!
When you set a temperature, you set an
average temperature for the whole
refrigerator cabinet. Temperatures inside
each compartment may vary from the
temperatures displayed on the panel,
depending on how much food you store
and where you place it. High or low room
temperature may also affect the actual
temperature inside the appliance.
1. POWER
Press and hold the POWER button at
least 3 seconds to enter/exit standby
mode. After entering the standby mode,
the POWER icon will light up, the
temperature area will display "OF", other
icons will be extinguished, and other key
functions will be invalid, until the original
control state is restored after pressing the
button again to exit the standby mode.
2. Freezer/Fridge conversion
Press and hold Freezer/Fridge conversion
button for 3 seconds to convert between
freezer compartment and fridge
compartment.
After that, the light will go out first,
and then turn on or flash once, which is
a normal phenomenon that the
control system has realized switching.
Caution！
 Before changing the compartment
8
setting, make sure that the stored food
is suitable for new setting mode. If
●
not, please empty it first.
 When the freezer mode is changed
to fridge mode, please open the door
for 5 minutes before putting in the food
that needs to be refrigerated.
 When the fridge mode is changed
to freezer mode, please close the door
and run for 200 minutes before putting
in the food that needs to be frozen.
 When the fridge mode is changed
to freezer mode, ensure there are no
bottled or canned drinks (especially
carbonated drinks) in the freezer
compartment. Bottles and cans may
●
explode.
3.
Press the TEMP. button to adjust the
temperature to the desired setting.
If you have set the Freezer
compartment type to Fahrenheit, the
temperature will be set in the following
sequence.
If you have set the Freezer
compartment type to Celsius, the
temperature will be set in the following
sequence.
If you have set the Fridge compartment
type to Fahrenheit, the temperature will
be set in the following sequence.
If you have set the Fridge compartment
TEMP.