Installing Your New Appliance - Hisense FV21C7HWE User's Operation Manual

Installing Your New Appliance

Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the
rest of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
●
be only used for forward or backward
movement. Moving the refrigerator
sideways may damage your floor and the
rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the refrigerator.
Suggestion: It is advisable for there to be
at least 50-70mm of clearance from the
back of the fridge to the wall, at least
100mm of clearance from its top, at least
100mm from its side to the wall and a
clear space in front to allow the doors to
open 135°. As shown in following
diagrams.
4
Note:

This appliance performs well with
ambient temperature between 12.8℃ to
●
43.3℃. The appliance may not work
properly if left at a temperature above or
below the indicated range.

Stand your appliance in a dry place to
avoid high moisture.

Keep the appliance out of direct
sunlight, rain or frost. Stand the appliance
away from heat sources such as stoves,
fires or heaters.
Leveling of appliance
For sufficient leveling and air circulating
in the lower rear section of the appliance,
the bottom feet may need to be adjusted.
You can adjust them manually by hand or
by using a suitable tool.