Hisense FV21C7HWE User's Operation Manual page 4

individual electrical socket which has a
voltage rating that matched the rating
plate.

Make sure that the plug is not squashed
or damaged. Otherwise, it may cause
short circuit, electric shock or overheat
and even cause a fire.

Do not insert the power plug if the
socket is loose, there is a risk of electric
shock or fire.
●

Switch off the appliance and disconnect
it from the main power before you clean or
move it.

Never unplug the appliance by pulling
on the electrical cord. Always grip the plug
firmly and pull straight out from the socket
to prevent damaging the power cord.

Do not operate the appliance without the
cover of interior lighting.
●

Any electrical component must be
replaced or repaired by a qualified
electrician or authorized service engineer.
Only genuine replacement parts should
be used.

Do not use electrical appliances such as
ice cream makers inside the food storage
compartments of the appliance unless
they are approved by the manufacturer.
3
To avoid eye injury, do not look direct
into the LED light located in the
refrigerator compartment. If it is not
functioning correctly, consult a qualified,
registered electrician or replace it in
accordance with the "cleaning and care"
chapter.
Refrigerant
The refrigerant isobutene (R600a) is
contained within the refrigerant circuit of
the appliance. During transportation and
installation of the appliance, ensure that
none of the components of the refrigerant
circuit becomes damaged.
The refrigerant (R600a) is flammable.
Caution: Risk of Fire

Don't store products which contain
flammable propellants (e.g. spray cans) or
explosive substances in the appliances.
Should the refrigerant circuit be
damaged:

Avoid open flames (candles, lamps etc.)
and sources of ignition.

Thoroughly ventilate the room in which
the appliance is situated.