Table of Contents
Advertisement
Installation Guide at the Seaside
CAUTION
• Air conditioners should not be installed in areas where corrosive gases, such as acid or alkaline gas, are
produced.
• Do not install the product where it could be exposed to sea wind (salty wind) directly. It can result
corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient performance.
CAUTION
• If outdoor unit is installed close to the seaside, it should avoid direct exposure to the sea wind. Otherwise
it needs additional anti corrosion treatment on the heat exchanger.
Selecting the location (Outdoor unit)
If the outdoor unit is to be installed close to the seaside, direct exposure to the sea wind should be avoided.
Install the outdoor unit on the opposite side of the sea wind direction.
Sea wind
a
In case of installing the outdoor unit on the seaside, set up a windbreak not to be exposed to the sea wind.
a
Sea wind
Windbreak
b
INSTALLATION
9
Advertisement
Table of Contents
