Kawai SR 3 Owner's Manual page 45

Digital electronic organs
Hide thumbs Also See for SR 3:
Table of Contents

Advertisement

(3) Set the program
number
using the arrow
switches.
BA »
fh
Program Number
The above display indicates the setting of the
program No.26 tone to the musical instruments
connected to the upper keyboard (that is, the
instruments
receiving the signal transmitted
from the upper keyboard channel on the same
channel).
Note:
Program
number
refers to the tone
number
of
musical instrument on receiving side. It can be set
by a three-digit numeral from 1 to 128.
Program
number
is set cyclically; for example,
1
comes after 128 or 128 precedes 1.
* Setting Method 2:
Transmission
by Registration
Memory (Channel
Setting)
(1) Turn the MIDI switch off.
(2) Depress the FUNCTION switch two times.
(3
(4
The multifunction display indicates the MIDI
transmission-reception channel of the pre-
sent registration memory.
MIDI channel
Program Mode
Match the transmission
channel
of the
registration memory to the channel of the
receiving
side
using
the
arrow
switch.
(Channel
setting
can
be made
within
the
range of 1-16).
Depress the FUNCTION switch again to turn
it off. Turn the MIDI switch on and change
the registration
memory.
The tone of the
musical
instruments on the reception side
changes accordingly.
39
© If the electronic organ is on the receiving side:
The Registration Memory changes upon receiving
the program number. (Channel setting)
(1) Turn the MIDI switch off.
(2) Depress the FUNCTION switch two times.
The multifunction display indicates the MIDI
transmission-reception channel of the pre-
sent registration memory.
(3) Match the reception channel of the registra-
tion memory to the channel of transmitting
side using the arrow switch. (Channel setting
can be made within the range of 1-16).
Depress the FUNCTION switch again to turn
it off. Turn the MIDI switch on and change
tone (program number) on the transmitting
side. The registration memory of the elec-
tronic organ changes accordingly.
The following table indicates the corresponding
relations between the registration memory and
program number.
(4
REGISTRATION
PROGRAM NO.
SWITCH
PROGRAM 1
1
2
3
4
5
6
7
8
9
0
1
=

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr 4

Table of Contents