Advertisement
a ENalate mia W-m OL-\tie-1emelac(-lar-lalem Blaal=
You can make a program by designating up to 24 selections in the order you want them to be
played. The unit will play the disc according to your program.
eXeedielatchatele Mmaalom atch alaremelacisla
.
|
ae
iam aes =i oa
L 1—1—1—1—1—)
|) 4 > tele
is
Place a disc on the tray and close it with the
& OPEN/CLOSE button.
Press the PROGRAM button.
"PROGRAM" appears in the display.
3-a To program discs in the order you want
to play
Press the DISC SELECT 1 - 5 button in the
order you want to program.
mae:
3406
AL
"AL" appears in the display.
3-s To program selections on a disc in the
order you want to play
1) Select the desired disc with the DISC SELECT
1-5 button.
2) Press
the 44 or PPI button repeatedly
until the desired selection is located.
Selection tobe — Total program time
programmed
3) Press the PROGRAM button.
The selection is stored, and the blinking number in
the display lights up.
Repeat 2) and 3) to select another selection.
To program the selection(s) on another disc, repeat
1), 2) and 3).
Press the > button to start playback.
The ®> indicator lights up.
To stop playing
Press the & button.
You can play the same program repeatedly as long as you do
not cancel program play or erase the program.
To erase the entire program
* Press the & button once during stop; twice during play.
¢ Press the & button.
¢ Turn off the power.
* Press the CONTINUE button.
if you press the PROGRAM button during
continuous or shuffie play
The selection being played will be the first one in the
program.
To program a whole disc
¢ Using the DISC SELECT 1-5 buttons
After steps 1 and 2:
1 Press one of the DISC SELECT 1-5 buttons to select the
disc.
2 Goon to step 5.
¢ Using the DISC SKIP button
After steps 1 and 2:
1 Press the DISC SKIP button to select the disc, "AL"
appears in the display.
2 Goon to step 5.
The whole disc is programmed as one step.
To check your program
Press the CHECK button. The first selection in the program
will be displayed.
Each time you press the CHECK button, the next selection in
the program will be displayed. After the last selection, "End"
will be indicated and the display will soon return to the
initial status.
Note
The playing time for selection numbers higher than 20 will
not be added into the total playing time.
Advertisement
