Advertisement
Playing Back Tapes
You can use tapes of type I and II for playback.
Playing Deck A or B
Sooes
coaC_rijOoo
e
2 Press the & / 4 button.
3
insert a recorded tape.
4 Press the TAPE SELECT button to select tape
type.
5 Press the > button.
Playback starts.
10
When the tape is played to the end, the deck stops.
To stop during playback, press the @ / & button.
To fast forward or rewind, press the P> or 44 button.
To pause, press the 11 PAUSE button. To resume, press the
a PAUSE button again.
To play a tape recorded with the Dolby NR* effect
Set the DOLBY NR switch to ON. The setting is operated on
both decks. This unit is provided with DOLBY B NR system.
When both decks are set to play mode
Only the sound from deck B will be heard.
Note
When a deck is operated while recording or playing back a
tape on the other deck, sound waver (uneven rotation) may
result.
* Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol 00 are trademarks of
Dolby Laboratories Licensing Corporation.
Playing from Deck to Deck—Relay Play
1 Insert tapes into decks A and B.
2 Press the & button on deck B.
Deck B starts playing.
3 Press the if PAUSE button and the ® button on
deck A.
When the tape in deck B ends, the tape in deck A starts
playing.
Advertisement
