Advertisement
g on Tapes
You can use tape type I and II for recording.
etoxaelae lave mci 2) pe
age)
cre diatom Kolel a <:1ael ceifate
Break off the tab of the side to be protected. For side A, break
off the right-hand tab facing the side A up.
This prevents further recording on that side.
Tab of side B
° Tab of side A
Cm
|
To record on a protected tape, cover the opening with plastic
:
fees
boo ee ee cee
es
tape.
1
Select a source (except TAPE) with the
function selectors.
You can also select the audio sources of equipment
connected to 'he VIDEO IN jacks.
insert a blank tape into deck B.
Press the TAPE SELECT button to select tape
type.
Set the DOLBY NR switch to ON or OFF.
The Dolby NR (noise reduction) system reduces
tape hiss nois2 in low-level, high-frequency signals
by boosting the signals during recording and then
lowering them during playback.
Press the @ REC button and start the
selected source.
Recording starts.
When the tape is recorded to the end, the deck stops.
To stop during recording, press the @ / & button.
To start recording more precisely
1 After steps 1 to 4 above, press the if PAUSE button.
2 Press the @ REC -utton.
3 Press the §f PAUSE button again to start recording.
Advertisement
