Table of Contents
Advertisement
iiiiiiiiliiill
The entered
channel
number
changes automatically
Remote control does not work
. Many digital channels have alternate channel numbers.The unit changes the numbers
automatically to the ones signifying the broadcasting stations. These are the numbers used
for analog broadcasts.
. Check the antenna
or cable connection
to the main unit.
. Check the batteries
of the remote control.
. Check if there is an obstacle
between
the infrared sensor window
and the remote
control.
. Test the signal output.
If OK, then possible remote sensor trouble.
(Refer to"lR Signal Check" on page 45.)
. Aim the remote control directly at the infrared sensor window
on the front of the unit.
. Reduce the distance to the unit.
. Re-insert the batteries with their polarities
(+/- signs) as indicated.
Problems with Closed Caption Feature
Misspelled
captions are
. Closed captioning
production
companies
may broadcast
programs
without
displayed,
correcting
the misspelling
in a live broadcast.
Captions are not entirely
. Captions that are delayed a few seconds behind the actual dialogue are common for
displayed,
or captions
are
live broadcasts. Most captioning
production
companies can display a dialogue to a
delayed behind
the dialogue,
maximum of 220 words per minute. Ifa dialogue exceeds that rate, selective editing is
used to insure that the captions remain up-to-date with the current TV screen dialogue.
Captions are displayed
as a
. Interference
from buildings
or weather
conditions
may cause captioning
to be
white
box.
incomplete.
No caption
is displayed
in the
. Broadcasting
station
may shorten the program
to insert advertisement.
The closed
Closed Caption-supported
caption
decoder
cannot
read the information
of the shortened
program.
program.
No caption
is displayed
. The videotape
may be illegally copied,
or the caption
signal might
not have been
when playing the videotape
read during
copying.
containing
captions.
Black box is displayed
in the
."Text"
mode is selected for caption.
Select"CAPTION
1","CAPTION2" or"OFF".
screen.
Completely
distorted
picture
. Make sure the disc is compatible
with the unit.
or black!white
picture
with
DVD
Picture freezes momentarily
. Check the disc for finger prints/scratches
and clean with a soft cloth wiping from
during
playback,
center to edge.
Disc cannot
be played.
Clean the disc.
Ensure the disc is correctly
inserted.
Check if the disc is defective
by trying another
disc.
Cancel the parental
lock or change the control level.
Insert a correct
disc that plays on this unit.
Handle a disc with special care so that it does not have fingerprints,
scratches, or
dusts on its surface.
Buttons do not work or the
. To completely
reset the unit, unplug
the power cord from the power outlet for
unit stops responding.
5-10 seconds.
The unit does not respond
to
. Operations
may not be permitted
by the disc. Refer to the instructions
of the disc.
some operating
commands
during
playback.
Angle does not switch.
.The angle cannot
be switched
for DVD which do not contain
multiple
angles. In
some cases multiple
angles are only recorded
for specific scenes.
Playback does not start
. Check the"PARENTAL" setting.
when the title is selected.
The password for rating level
. Enter the default
password"4737",
then your forgotten
password will be cleared.
has been forgotten.
Note:
• The LCDpanel is manufactured to provide manyyears of useful life. Occasionally a few non active pixels may appear as a fixed point of
blue, green or red. This is not to be considered a defect in the LCDscreen.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more
details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
oSome functions are prohibited on some discs.
EN
Advertisement
Table of Contents
