Sylvania LD155SC8 Owner's Manual page 36

This feature allows you t oassign aspecific point on adisc tobe called back
later,
To set a marker
_ During playback, press [MODE] repeatedly until
.... /" "appears.
e.g.) DVD
_ Use [Cursor A/V] repeatedly until maker search menu
appears.
e.g.) DVD
or .
_ Use [Cursor _t liD-] to select an available marker within
60 seconds.
e.g.) DVD
or
J_ When the playback reaches the point at which you
want to set a marker, press [ENTER].
, Marker is now set.
e.g.) DVD
To return to the marker later
_ To select a desired marker, repeat steps 1-3 in
"To set a marker"
e.g.) DVD
or
_ Press [ENTER] at the desired marker to start playback
from the specific point which you set.
e.g.) DVD
Note:
. Maker Search menu will disappear in about 60 seconds when
there is no input.
° You can mark up to 10 points.
° To clear a marker, select the marker to be cleared, and then
press [CLEAR].
° Ejecting the disc or turning offthe power will erase all
markers.
o Selecting "at step 3 in the section "To set a marker"
will also erase all markers.
_;_ Press [RETURN[ to exit.
EN