Sylvania LC427SSX Service Manual
  1. Manuals
  2. Brands
  3. Sylvania Manuals
  4. LCD TV
  5. LC427SSX
  6. Service manual
Sylvania LC427SSX Service Manual

Sylvania LC427SSX Service Manual

42” lcd tv
Hide thumbs Also See for LC427SSX:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
LCD TV

SERVICE MANUAL

42" LC427SSX
42" LC427SSX
42" 42MF439B/F7
42" 42MF439B/F7
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other trademarks used herein remain the exclusive property of
their respective owners. Nothing contained in this manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any
other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights
to the fullest extent of the law.
chassis FL9.2
Contents
SYLVANIA Limited (Serial No. : DS1A**********)
SYLVANIA Limited (Serial No. : YA2A**********)
MAGNAVOX
MAGNAVOX
(Serial No. : DS1A**********)
(Serial No. : YA2A**********)
A91H1UH/A91H0UH/A91H6UF/A91H7UF
091026

Advertisement

Table of Contents
loading

Related Manuals for Sylvania LC427SSX

Summary of Contents for Sylvania LC427SSX

  • Page 1: Service Manual

    Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners.

  • Page 2: Pixels

    IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all Funai Equipment. The service procedures recommended by Funai and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Specifications ................1-1 Important Safety Precautions .

  • Page 4: Specifications

    SPECIFICATIONS < TUNER / NTSC > ANT. Input ---------------------- 75 Ω Unbal., F type Description Condition Unit Nominal Limit 1. AFT Pull-In Range ±2.3 ±2.1 TV.ch.4 dBµ 2. Synchronizing Sens. CA.ch.31 dBµ CA.ch.87 dBµ < TUNER / ATSC > Description Condition Unit Nominal...

  • Page 5: Important Safety Precautions

    IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

  • Page 6: Specifications

    3. Design Alteration Warning - Do not alter or add 7. Product Safety Notice - Some electrical and to the mechanical or electrical design of this TV mechanical parts have special safety-related receiver. Design alterations and additions, characteristics which are often not evident from including, but not limited to circuit modifications visual inspection, nor can the protection they give and the addition of items such as auxiliary audio...
  • Page 7 Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements.
  • Page 8 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards. 1.

  • Page 9: Standard Notes For Servicing

    STANDARD NOTES FOR SERVICING Circuit Board Indications How to Remove / Install Flat Pack-IC 1. The output pin of the 3 pin Regulator ICs is 1. Removal indicated as shown. With Hot-Air Flat Pack-IC Desoldering Machine: Top View Bottom View 1.
  • Page 10 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
  • Page 11 With Iron Wire: 2. Installation 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.
  • Page 12 Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.

  • Page 13: Cabinet Disassembly Instructions

    CABINET DISASSEMBLY INSTRUCTIONS [LC427SSX (Serial No. : DS1A**********), 42MF439B/F7 (Serial No. : DS1A**********)] 1. Disassembly Flowchart Removal Step/ This flowchart indicates the disassembly steps for the Remove/*Unhook/ Loc. Part Fig. Unlock/Release/ cabinet parts, and the CBA in order to gain access to...
  • Page 14 (2) Parts to be removed or installed. H = Hex Screw, CN = Connector * = Unhook, Unlock, Release, Unplug, or Desolder (3) Fig. No. showing procedure of part location e.g. 2(S-2) = two Screws (S-2), (4) Identification of parts to be removed, unhooked, 2(L-2) = two Locking Tabs (L-2) unlocked, released, unplugged, unclamped, or (5) Refer to the following "Reference Notes in the...
  • Page 15 [6] Jack Power CBA (S-10) (S-9) [5] Jack Holder(A) (S-10) [4] Digital Main CBA Unit [3] Jack Holder(D) (S-8) (S-6) (S-11) [7] Inverter Power CBA Shield Box (S-7) (S-11) Fig. D2 A91H1DC...
  • Page 16 [9] PCB Holder [11] Stand Bracket (S-15) (S-17) (S-16) (S-13) (S-18) (S-15) (S-16) (S-18) (S-17) (S-14) [10] AC Inlet Holder (S-12) [8] Wall Mount Bracket Fig. D3 A91H1DC...
  • Page 17 [17] Front Cabinet [15] Function CBA (S-21) [13] Speaker Speaker Box [F] (S-20) [14] Junction (S-21) (S-19) [13] Speaker (S-20) [16] IR Sensor [12] LCD Module Speaker Box [F] Assembly (S-19) Fig. D4 A91H1DC...

  • Page 18: Wiring Diagram

    TV Cable Wiring Diagram To LCD Module Assembly Inverter Power CBA Jack Power CBA CN1803 CN1804 CN901 CN1801 CN601 CN1501 CN801 CN802 CN203 CN202 CN201 CN1601 Function CN3702 CN3701 To AC Inlet To Speaker CN3901 Digital Main CBA Unit To LCD Module Assembly Junction WH1301B...
  • Page 19 CABINET DISASSEMBLY INSTRUCTIONS [LC427SSX (Serial No. : YA2A**********), 42MF439B/F7 (Serial No. : YA2A**********)] 1. Disassembly Flowchart Removal Step/ Remove/*Unhook/ This flowchart indicates the disassembly steps for the Loc. Part Fig. Unlock/Release/ cabinet parts, and the CBA in order to gain access to...
  • Page 20 Note: desoldered. P = Spring, L = Locking Tab, S = Screw, (1) Order of steps in procedure. When reassembling, H = Hex Screw, CN = Connector follow the steps in reverse order. These numbers * = Unhook, Unlock, Release, Unplug, or Desolder are also used as the Identification (location) No.
  • Page 21 [8] Jack Power CBA (S-10) (S-9) [7] Jack Holder(A) (S-10) [6] Digital Main CBA Unit [5] Jack Holder(D) (S-8) (S-6) (S-11) [9] Inverter Power CBA Shield Box (S-7) (S-11) Fig. D2 A91H6DC...
  • Page 22 [11] PCB Holder [13] Stand Bracket (S-15) (S-17) (S-16) (S-13) (S-18) (S-15) (S-16) (S-18) (S-17) (S-14) [12] AC Inlet Holder (S-12) [10] Wall Mount Bracket Fig. D3 4-10 A91H6DC...
  • Page 23 [19] Front Cabinet Assembly [17] Function CBA (S-21) [15] Speaker Speaker Box [F] (S-20) [16] Junction (S-21) (S-19) [15] Speaker (S-20) [18] IR Sensor [14] LCD Module Speaker Box [F] Assembly (S-19) Fig. D4 4-11 A91H6DC...
  • Page 24 TV Cable Wiring Diagram To LCD Module Assembly Inverter Power CBA Jack Power CBA CN1803 CN1804 CN901 CN1801 CN601 CN1501 CN801 CN802 CN203 CN202 CN201 CN1601 Function CN3702 CN3701 To AC Inlet To Speaker CN3901 Digital Main CBA Unit To LCD Module Assembly Junction WH1301B...

  • Page 25: Electrical Adjustment Instructions

    Tuner : ****-*****-**** How to make the Service remote Safety : safety_Non control unit: [ LC427SSX ] Cut “A” portion of the attached remote control unit as shown in Fig. 1. service button Fig. 1 [ 42MF439B/F7 ] Cut “A” portion of the attached remote control unit as shown in Fig.

  • Page 26: Vcom Adjustment

    1. Purity Check Mode 2. VCOM Adjustment This mode cycles through full-screen displays of red, Test Point Adj. Point green, blue, and white to check for non-active pixels. [CHANNEL UP/DOWN ] 1. Enter the Service mode. Screen buttons 2. Each time pressing [7] button on the service M.

  • Page 27: White Balance Adjustment

    The white balance adjustment should be 5. [CUTOFF] Press [1] button to select “COR” for Red Cutoff performed when replacing the LCD Panel adjustment. Press [3] button to select “COB” for or Digital CBA. Blue Cutoff adjustment. [DRIVE] 3. White Balance Adjustment Press [4] button to select “DR”...

  • Page 28: How To Initialize The Lcd Tv

    HOW TO INITIALIZE THE LCD TV The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure.

  • Page 29: Firmware Renewal Mode

    FIRMWARE RENEWAL MODE Equipment Required The appearance shown in *1 is described as follows. Appearance State a. USB memory Downloading the firmware from b. Remote Control Unit Downloading... the USB memory. Writing the downloaded firmware Writing... Firmware Update Procedure in flash memory. Checking...

  • Page 30: Troubleshooting

    TROUBLESHOOTING [ Power Supply Section ] ( Inverter Power CBA ) FLOW CHART NO.1 The power cannot be turned on. Is the fuse (F1601) normal? See FLOW CHART No.2 <The fuse blows out.> Check if there is any leak or short-circuiting on the primary circuit component, and service it if defective.
  • Page 31 FLOW CHART NO.5 AL+5V is not output. Check C1103, D1101, D1102 and their periphery circuit, and service it if defective. FLOW CHART NO.6 AL+3.3V is not output. Check C1103, D1101, D1102 and their periphery circuit, and service it if defective. Check D1109 and their periphery circuit, and service it if defective.
  • Page 32 FLOW CHART NO.10 P-ON+8.2V is not output. FLOW CHART NO.11 P-ON+5V is not output. FLOW CHART NO.12 P-ON+3.3V is not output. Replace Q605. A91H1TR...
  • Page 33 [ Video Signal Section ] FLOW CHART NO.1 The key operation is not functioning. Re-install the switches (SW1351~SW1355, SW1357) correctly or replace the poor switch. Check the switches (SW1351~SW1355, SW1357) and their periphery, and service it if defective. Replace Digital Main CBA Unit. FLOW CHART NO.2 No operation is possible from the remote control unit.
  • Page 34 FLOW CHART NO.3 Picture does not appear normally. (EXT. input) Are the video signals inputted to each pin of IC401? Check the line between video input terminal and each pin of IC401. → JK703 IC401 3PIN VIDEO-IN 1 IC401 3PIN VIDEO-IN 1 →...
  • Page 35 [ Audio Signal Section ] FLOW CHART NO.1 Picture does not appear normally. (EXT. input) Are the audio(L/R) signals inputted to each pin of Check the line between audio input terminal and IC401? each pin of IC401. → JK704, JK705 IC401 14,15PIN AUDIO(L/R)-IN 1...
  • Page 36 FLOW CHART NO.2 Picture does not appear normally. (Tuner input) (Output to audio (Output to speakers) output terminal) Are the audio(L/R) signals outputted to Pin(8, 10) of Replace Digital Main CBA Unit or LCD Module Assembly. CN202? Check SP801,SP802 and their periphery circuit, and service it if defective.

  • Page 37: Block Diagrams

    BLOCK DIAGRAMS System Control Block Diagram A91H1BLS...
  • Page 38 Video Block Diagram A91H1BLV...
  • Page 39 Audio Block Diagram A91H1BLA...
  • Page 40 Digital Signal Process Block Diagram A91H1BLD...
  • Page 41 Power Supply 1 Block Diagram A91H1BLP1...
  • Page 42 Power Supply 2 Block Diagram A91H1BLP2...

  • Page 43: Schematic Diagrams / Cba And Test Points

    SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
  • Page 44 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V. 2.
  • Page 45 Jack Power 1/3 Schematic Diagram NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. A91H1SCJP1 10-3...
  • Page 46 Jack Power 2/3 Schematic Diagram A91H1SCJP2 10-4...
  • Page 47 Jack Power 3/3 Schematic Diagram A91H1SCJP3 10-5...
  • Page 48 Inverter Power 1/3 Schematic Diagram CAUTION ! NOTE: Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! : For continued protection against risk of fire, The voltage for parts in hot circuit is measured using If Main Fuse (F1601) is blown , check to see that all components in the power supply replace only with same type 8A, 250V fuse.
  • Page 49 Inverter Power 2/3 Schematic Diagram NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. 10-7 A91H1SCIP2...
  • Page 50 Inverter Power 3/3 Schematic Diagram NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. 10-8 A91H1SCIP3...
  • Page 51 IR Sensor & Junction Schematic Diagram 10-9 A91H1SCIR...
  • Page 52 Function Schematic Diagram 10-10 A91H1SCF...
  • Page 53 Digital Main 1/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. 10-11 A91H1SCD1...
  • Page 54 Digital Main 2/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. 10-12 A91H1SCD2...
  • Page 55 Digital Main 3/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. 10-13 A91H1SCD3...
  • Page 56 Digital Main 4/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. A91H1SCD4 10-14...
  • Page 57 Digital Main 5/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. A91H1SCD5 10-15...
  • Page 58 Jack Power CBA Top View Because a hot chassis ground is present in the power NOTE: supply circuit, an isolation transformer must be used. The voltage for parts in hot circuit is measured using Also, in order to have the ability to increase the input hot GND as a common terminal.
  • Page 59 Jack Power CBA Bottom View Because a hot chassis ground is present in the power NOTE: supply circuit, an isolation transformer must be used. The voltage for parts in hot circuit is measured using Also, in order to have the ability to increase the input hot GND as a common terminal.
  • Page 60 Inverter Power CBA Top View Because a hot chassis ground is present in the power CAUTION ! supply circuit, an isolation transformer must be used. Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. Also, in order to have the ability to increase the input CAUTION ! : For continued protection against risk of fire, slowly,when troubleshooting this type power supply...
  • Page 61 Inverter Power CBA Bottom View Because a hot chassis ground is present in the power CAUTION ! supply circuit, an isolation transformer must be used. Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. Also, in order to have the ability to increase the input CAUTION ! : For continued protection against risk of fire, If Main Fuse (F1601) is blown , check to see that all components in the power supply...
  • Page 62 IR Sensor CBA Top View Function CBA Top View IR Sensor CBA Bottom View Function CBA Bottom View BA94H0F01032-C Junction CBA Junction CBA Top View Bottom View BA94H0F01032-B BA94H0F01012-D 10-20...

  • Page 63: Waveforms

    WAVEFORMS WF1 ~ WF4 = Waveforms to be observed at Waveform check points. (Shown in Schematic Diagram.) Input: NTSC Color Bar Signal (with 1kHz Audio Signal) Pin 18 of CN202 Pin 22 of CN202 (VIDEO IN) (S-VIDEO IN) CVBS CVBS 0.2V 0.2V 20ms...

  • Page 64: Wiring Diagram

    WIRING DIAGRAM CN202 CL202 CN3702 REMOTE S-VIDEO LED1 -IN1 KEY-IN1 S-VIDEO AUDIO(L)-OUT -IN2 VIDEO AUDIO(R)-OUT -IN1 AUDIO(L) AMP(L)-OUT -IN1 AMP(R)-OUT AUDIO(R) -IN1 AUDIO-MUTE VIDEO SPDIF -IN2 AUDIO(L) AL+3.3V -IN2 AL+3.3V AUDIO(R) -IN2 CVBS/Y/S-Y-IN CN3902 AUDIO(L) USB+5V -OUT Pb-IN USB(-) AUDIO(R) USB(+) Pr/S-C-IN -OUT...

  • Page 65: Exploded Views

    EXPLODED VIEWS Cabinet [LC427SSX (Serial No. : DS1A**********), 42MF439B/F7 (Serial No. : DS1A**********)] CL801 SP801 Function CBA CL1803 CL1804 Junction CBA CL802 CL1302 SP802 Jack Power CBA CL1301 IR Sensor CBA LCD-1 CL901 AC601 CL1601 FC1601 CL201 CL202 Stand Assembly...
  • Page 66 Cabinet [LC427SSX (Serial No. : YA2A**********), 42MF439B/F7 (Serial No. : YA2A**********)] CL801 SP801 Function CBA CL1803 CL1804 Junction CBA CL802 CL1302 SP802 Jack Power CBA CL1301 IR Sensor CBA LCD-1 CL901 AC601 CL1601 CL201 CL202 CL3901 Stand Base Assembly X3301...
  • Page 67 Packing [LC427SSX (Serial No. : DS1A**********), 42MF439B/F7 (Serial No. : DS1A**********) Packing Tape X14 X6 Some Ref. Numbers are not in sequence. AC601 Tape Stand Assembly Packing Tape Packing Tape Packing Tape PP Band 13-3 A91H1PEX...
  • Page 68 Packing [LC427SSX (Serial No. : YA2A**********), 42MF439B/F7 (Serial No. : YA2A**********) Packing Tape X14 X6 Some Ref. Numbers are not in sequence. AC601 Tape Stand Base Assembly Packing Tape Packing Tape Packing Tape PP Band 13-4 A91H6PEX...

  • Page 69: Mechanical Parts List

    MECHANICAL PARTS LIST [LC427SSX (Serial No. : DS1A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. CARTON(U) A91H1UH 1EM326162 Before replacing any of these components, read CARTON(L) A94H0UH 1EM325858...
  • Page 70 MECHANICAL PARTS LIST [LC427SSX (Serial No. : YA2A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. ACCESSORIES Before replacing any of these components, read AC601# AC CORD WITH A GND WIRE UL/CSA/ 162/...
  • Page 71 MECHANICAL PARTS LIST [42MF439B/F7 (Serial No. : DS1A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. CARTON(U) A91H0UH 1EM326137 Before replacing any of these components, read CARTON(L) A94H0UH 1EM325858 carefully the product safety notice in this service ACCESSORIES manual.
  • Page 72 MECHANICAL PARTS LIST [42MF439B/F7 (Serial No. : YA2A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. ACCESSORIES Before replacing any of these components, read AC601# AC CORD WITH A GND WIRE UL/CSA/ 162/ WAV0162LW001 NO/BLACK carefully the product safety notice in this service...

  • Page 73: Electrical Parts List

    ELECTRICAL PARTS LIST [LC427SSX (Serial No. : DS1A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C603 POLYESTER FILM CAP . (PB FREE) 0.047µF/ CA2A473DT018 100V J Before replacing any of these components, read C604 CERAMIC CAP .
  • Page 74 Ref. No. Description Part No. Ref. No. Description Part No. C720 CHIP CERAMIC CAP . F Z 0.47µF/16V CHD1CZ30F474 C856 CHIP CERAMIC CAP . B K 470pF/50V CHD1JK30B471 C721 CHIP CERAMIC CAP .(1608) CH J 100pF/50V CHD1JJ3CH101 C863 ELECTROLYTIC CAP . 47µF/25V M CE1EMASDL470 C722 CHIP CERAMIC CAP .(1608) B K 2.2µF/10V...
  • Page 75 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES.(1608) 1/10W 0 Ω D639 DIODE ZENER 11BSB-T26 NDTB011BST26 R401 RRXAZR5Z0000 CHIP RES.(1608) 1/10W 0 Ω D640 DIODE ZENER 3V9BSB-T26 NDTB3R9BST26 R402 RRXAZR5Z0000 CHIP RES. 1/10W J 100 Ω D801 DIODE SWITCHING HSS4148TE-E QDTZ0HSS4148...
  • Page 76 Ref. No. Description Part No. Ref. No. Description Part No. METAL OXIDE FILM RES 2W J 330 Ω CHIP RES. 1/10W J 15k Ω R653 RN02331ZU001 R816 RRXAJR5Z0153 RES CARBON FILM T 1/4W J 560 Ω CHIP RES. 1/10W J 5.6k Ω R654 RCX4561T1001 R817...
  • Page 77 INVERTER ASSEMBLY Ref. No. Description Part No. C1706 CERAMIC CAP . B K 100pF/1KV CCD3AKD0B101 Ref. No. Description Part No. C1707 POLYESTER FILM CAP . (PB FREE) 0.1µF/100V CA2A104DT018 INVERTER ASSEMBLY A91H0M1V-001 Consists of the following: C1708 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 INVERTER POWER CBA A91H0M1V-001-IV...
  • Page 78 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM T 1/4W J 22 Ω D1602 DIODE ZENER 4V7BSB-T26 NDTB4R7BST26 R1109 RCX4220T1001 CHIP RES. 1/10W J 470 Ω D1603 DIODE ZENER 27BSB-T26 NDTB027BST26 R1206 RRXAJR5Z0471 CHIP RES. 1/10W J 3.3k Ω D1604 DIODE FAST RECOVERY 30PFB60 QDWZ030PFB60...
  • Page 79 Ref. No. Description Part No. Ref. No. Description Part No. R1441 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 BC1201 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 GLASS GLAZE RES. 1/2W J 1M Ω R1601# RXX2JZLZ0105 BC1501 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 GLASS GLAZE RES. 1/2W J 8.2M Ω R1602# RXX2JZLZ0825 BC1601...
  • Page 80 Ref. No. Description Part No. CHIP RES. 1/10W J 3.3k Ω R1302 RRXAJR5Z0332 CHIP RES. 1/10W J 270 Ω R1303 RRXAJR5Z0271 CHIP RES. 1/10W J 300 Ω R1304 RRXAJR5Z0301 CHIP RES. 1/10W J 1k Ω R1305 RRXAJR5Z0102 MISCELLANEOUS CL1301 WIRE ASSEMBLY 4PIN 4PIN 200MM WX1A94H0-210 CL1302 WIRE ASSEMBLY 8PIN 8PIN/910MM...
  • Page 81 ELECTRICAL PARTS LIST [LC427SSX (Serial No. : YA2A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C603 POLYESTER FILM CAP . (PB FREE) 0.047µF/ CA2A473DT018 100V J Before replacing any of these components, read C604 CERAMIC CAP .
  • Page 82 Ref. No. Description Part No. Ref. No. Description Part No. C720 CHIP CERAMIC CAP . F Z 0.47µF/16V CHD1CZ30F474 C856 CHIP CERAMIC CAP . B K 2200pF/50V CHD1JK30B222 C721 CHIP CERAMIC CAP .(1608) CH J 100pF/50V CHD1JJ3CH101 C863 ELECTROLYTIC CAP . 47µF/25V M CE1EMASDL470 C722 CHIP CERAMIC CAP .(1608) B K 2.2µF/10V...
  • Page 83 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES.(1608) 1/10W 0 Ω D639 DIODE ZENER 52 11BSB-T52 NDJB011BST52 R401 RRXAZR5Z0000 CHIP RES.(1608) 1/10W 0 Ω D640 DIODE ZENER 52 3V9BSB-T52 NDJB3R9BST52 R402 RRXAZR5Z0000 CHIP RES. 1/10W J 100 Ω D801 DIO DE SWITCHING 52 HSS4148TA-E QDJZ0HSS4148...
  • Page 84 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM J 52 1/4W J 560 Ω CHIP RES. 1/10W J 5.6k Ω R654 RCX4561T1004 R817 RRXAJR5Z0562 CHIP RES. 1/10W J 10 Ω RES CARBON FILM J 52 1/4W J 2.2 Ω R655 RRXAJR5Z0100 R818...
  • Page 85 INVERTER ASSEMBLY Ref. No. Description Part No. C1706 CERAMIC CAP . B K 100pF/1KV CCD3AKD0B101 Ref. No. Description Part No. C1707 ELECTROLYTIC CAP . 22µF/50V M CE1JMASDL220 INVERTER ASSEMBLY A91H6M1V-001 C1708 CAP CERAMIC AXIAL 52 100000pF/50V/F/Z CA1J104TU098 Consists of the following: C1709 CAP CERAMIC AXIAL 52 330pF/50V/B/K CA1J331TU097...
  • Page 86 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM J 52 1/4W G 6.8k Ω D1603 DIODE ZENER 52 27BSB-T52 NDJB027BST52 R1105 RCX4682T1005 RES CARBON FILM J 52 1/4W G 27k Ω D1604 DIODE FAST RECOVERY 30PFB60 QDWZ030PFB60 R1106 RCX4273T1005...
  • Page 87 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM J 52 1/4W J 470 Ω R1437 RCX4471T1004 HEAT SINK EAL ASSEMBLY A81H0UH 1EM424648 RES CARBON FILM J 52 1/4W J 3.3k Ω R1438 RCX4332T1004 POW HEAT SINK A7120UH 1EM423993 RES CARBON FILM J 52 1/4W J 2.2k Ω...
  • Page 88 Ref. No. Description Part No. D1301 LED L-53HT NP4Z000L53HT D1302 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA RESISTORS RES CARBON FILM J 52 1/4W J 100 Ω R1301 RCX4101T1004 CHIP RES. 1/10W J 3.3k Ω R1302 RRXAJR5Z0332 CHIP RES. 1/10W J 270 Ω R1303 RRXAJR5Z0271 CHIP RES.
  • Page 89 ELECTRICAL PARTS LIST [42MF439B/F7 (Serial No. : DS1A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C603 POLYESTER FILM CAP . (PB FREE) 0.047µF/ CA2A473DT018 100V J Before replacing any of these components, read C604 CERAMIC CAP .
  • Page 90 Ref. No. Description Part No. Ref. No. Description Part No. C720 CHIP CERAMIC CAP . F Z 0.47µF/16V CHD1CZ30F474 C856 CHIP CERAMIC CAP . B K 470pF/50V CHD1JK30B471 C721 CHIP CERAMIC CAP .(1608) CH J 100pF/50V CHD1JJ3CH101 C863 ELECTROLYTIC CAP . 47µF/25V M CE1EMASDL470 C722 CHIP CERAMIC CAP .(1608) B K 2.2µF/10V...
  • Page 91 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES.(1608) 1/10W 0 Ω D639 DIODE ZENER 11BSB-T26 NDTB011BST26 R401 RRXAZR5Z0000 CHIP RES.(1608) 1/10W 0 Ω D640 DIODE ZENER 3V9BSB-T26 NDTB3R9BST26 R402 RRXAZR5Z0000 CHIP RES. 1/10W J 100 Ω D801 DIODE SWITCHING HSS4148TE-E QDTZ0HSS4148...
  • Page 92 Ref. No. Description Part No. Ref. No. Description Part No. METAL OXIDE FILM RES 2W J 330 Ω CHIP RES. 1/10W J 15k Ω R653 RN02331ZU001 R816 RRXAJR5Z0153 RES CARBON FILM T 1/4W J 560 Ω CHIP RES. 1/10W J 5.6k Ω R654 RCX4561T1001 R817...
  • Page 93 INVERTER ASSEMBLY Ref. No. Description Part No. C1706 CERAMIC CAP . B K 100pF/1KV CCD3AKD0B101 Ref. No. Description Part No. C1707 POLYESTER FILM CAP . (PB FREE) 0.1µF/100V CA2A104DT018 INVERTER ASSEMBLY A91H0M1V-001 Consists of the following: C1708 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 INVERTER POWER CBA A91H0M1V-001-IV...
  • Page 94 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM T 1/4W J 22 Ω D1602 DIODE ZENER 4V7BSB-T26 NDTB4R7BST26 R1109 RCX4220T1001 CHIP RES. 1/10W J 470 Ω D1603 DIODE ZENER 27BSB-T26 NDTB027BST26 R1206 RRXAJR5Z0471 CHIP RES. 1/10W J 3.3k Ω D1604 DIODE FAST RECOVERY 30PFB60 QDWZ030PFB60...
  • Page 95 Ref. No. Description Part No. Ref. No. Description Part No. R1441 WIRE COPPER 6111-06003-0120 XZ40C0SHG002 BC1201 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 GLASS GLAZE RES. 1/2W J 1M Ω R1601# RXX2JZLZ0105 BC1501 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030 GLASS GLAZE RES. 1/2W J 8.2M Ω R1602# RXX2JZLZ0825 BC1601...
  • Page 96 Ref. No. Description Part No. CHIP RES. 1/10W J 3.3k Ω R1302 RRXAJR5Z0332 CHIP RES. 1/10W J 270 Ω R1303 RRXAJR5Z0271 CHIP RES. 1/10W J 300 Ω R1304 RRXAJR5Z0301 CHIP RES. 1/10W J 1k Ω R1305 RRXAJR5Z0102 MISCELLANEOUS CL1301 WIRE ASSEMBLY 4PIN 4PIN 200MM WX1A94H0-210 CL1302 WIRE ASSEMBLY 8PIN 8PIN/910MM...
  • Page 97 ELECTRICAL PARTS LIST [42MF439B/F7 (Serial No. : YA2A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C603 POLYESTER FILM CAP . (PB FREE) 0.047µF/ CA2A473DT018 100V J Before replacing any of these components, read C604 CERAMIC CAP .
  • Page 98 Ref. No. Description Part No. Ref. No. Description Part No. C720 CHIP CERAMIC CAP . F Z 0.47µF/16V CHD1CZ30F474 C856 CHIP CERAMIC CAP . B K 2200pF/50V CHD1JK30B222 C721 CHIP CERAMIC CAP .(1608) CH J 100pF/50V CHD1JJ3CH101 C863 ELECTROLYTIC CAP . 47µF/25V M CE1EMASDL470 C722 CHIP CERAMIC CAP .(1608) B K 2.2µF/10V...
  • Page 99 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES.(1608) 1/10W 0 Ω D639 DIODE ZENER 52 11BSB-T52 NDJB011BST52 R401 RRXAZR5Z0000 CHIP RES.(1608) 1/10W 0 Ω D640 DIODE ZENER 52 3V9BSB-T52 NDJB3R9BST52 R402 RRXAZR5Z0000 CHIP RES. 1/10W J 100 Ω D801 DIO DE SWITCHING 52 HSS4148TA-E QDJZ0HSS4148...
  • Page 100 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM J 52 1/4W J 560 Ω CHIP RES. 1/10W J 5.6k Ω R654 RCX4561T1004 R817 RRXAJR5Z0562 CHIP RES. 1/10W J 10 Ω RES CARBON FILM J 52 1/4W J 2.2 Ω R655 RRXAJR5Z0100 R818...
  • Page 101 INVERTER ASSEMBLY Ref. No. Description Part No. C1706 CERAMIC CAP . B K 100pF/1KV CCD3AKD0B101 Ref. No. Description Part No. C1707 ELECTROLYTIC CAP . 22µF/50V M CE1JMASDL220 INVERTER ASSEMBLY A91H6M1V-001 C1708 CAP CERAMIC AXIAL 52 100000pF/50V/F/Z CA1J104TU098 Consists of the following: C1709 CAP CERAMIC AXIAL 52 330pF/50V/B/K CA1J331TU097...
  • Page 102 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM J 52 1/4W G 6.8k Ω D1603 DIODE ZENER 52 27BSB-T52 NDJB027BST52 R1105 RCX4682T1005 RES CARBON FILM J 52 1/4W G 27k Ω D1604 DIODE FAST RECOVERY 30PFB60 QDWZ030PFB60 R1106 RCX4273T1005...
  • Page 103 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM J 52 1/4W J 470 Ω R1437 RCX4471T1004 HEAT SINK EAL ASSEMBLY A81H0UH 1EM424648 RES CARBON FILM J 52 1/4W J 3.3k Ω R1438 RCX4332T1004 POW HEAT SINK A7120UH 1EM423993 RES CARBON FILM J 52 1/4W J 2.2k Ω...
  • Page 104 Ref. No. Description Part No. D1301 LED L-53HT NP4Z000L53HT D1302 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA RESISTORS RES CARBON FILM J 52 1/4W J 100 Ω R1301 RCX4101T1004 CHIP RES. 1/10W J 3.3k Ω R1302 RRXAJR5Z0332 CHIP RES. 1/10W J 270 Ω R1303 RRXAJR5Z0271 CHIP RES.

  • Page 105: Revision History

    (DIGITAL MAIN CBA UNIT, JACK POWER CBA, INVERTER ASSEMBLY) • 2009-10-27 LC427SSX (Serial No. : YA2A**********) , 42MF339B/F7 (Serial No. : YA2A**********) Assembled the Front and Rear Cabinet. Changed the exploaded view and the parts list from the component level to the Assembly level.

This manual is also suitable for:

42mf439b42mf43f742mf439bf7

Table of Contents