Related Manuals for Tektronix Profile PDR300
Summary of Contents for Tektronix Profile PDR300
- Page 1 Installation Manual Profile PDR200 & PDR300 Video File Servers Tektronix, Inc. PO Box 1000 Wilsonville, OR 97070-1000 USA 1-800-547-8949 (USA and Canada) 1-503-682-7300 http://www.tektronix.com...
- Page 2 Tektronix, Inc., P.O. Box 1000, Wilsonville, Oregon 97070-1000 USA. TEKTRONIX, TEK and Profile are registered trademarks of Tektronix, Inc. Other trade names used in this document are trademarks or registered trademarks of the manufacturers or vendors of the associated products.
- Page 3 Tektronix Product Support You can get technical assistance, check on the status of problems, or report new problems by contacting our Product Support Group. United States and Canada Monday–Friday 5:30AM–5:00PM Pacific Time (800) 547-8949 Europe Monday–Friday 9:00AM–5:30PM Austria 02236-8092-400 Netherlands...
- Page 4 Profile Video File Server Installation...
-
Page 5: Table Of Contents
Contents Tektronix Product Support .....................iii General Safety Summary.......................ix Safety Terms and Symbols ....................x Service Safety Summary......................x Certifications and Compliances....................xi Chapter 1 Introduction Scope .............................1-1 Related Documentation......................1-2 Organization of the Manual ....................1-2 Product Description........................1-3 Product Features.......................1-3 Front Panel Controls and Indicators..................1-4 Accessories..........................1-5... - Page 6 Contents Chapter 3 Starting Your Profile System Power On/Off ......................... 3-1 Logging On........................3-1 Automatic Logon ......................3-1 Logon as Administrator ....................3-2 Logon as Profile ......................3-2 Turning Power On ......................3-2 Turning Power Off ......................3-4 System Set-up ........................3-5 Configuring Your Profile System ..................
- Page 7 Contents Figures The Profile Video File Server....................1-1 Profile Video File Server Front Panel ................... 1-4 Configuration Labels Locations .................... 1-13 Rack Slide Set for Right Side of Profile Chassis and Rack ..........2-2 Spacing Specification for Mounting Holes in a Rack ............2-3 Front Rail Mounting Detail ....................
- Page 8 Contents Tables Profile Video File Server Model Descriptions ..............1-7 PDR200 Factory Standard Configurations with Installable Options ....... 1-8 PDR200 Option DV Factory Standard Configurations with other Installable Options ..1-9 PDR304 and PDR308 Factory Standard Configurations with Installable Options ..1-10 PDR312 and PDR316 Factory Standard Configurations with Installable Options ..
-
Page 9: General Safety Summary
Safety Summaries General Safety Summary Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it. Only qualified personnel should perform service procedures. While using this product, you may need to access other parts of the system. Read the General Safety summary in other system manuals for warnings and cautions related to operating the system. -
Page 10: Safety Terms And Symbols
Safety Summaries Safety Terms and Symbols Terms in This These terms may appear in this manual: Manual WARNING: Warning statements identify conditions or practices that can result in personal injury or loss of life. CAUTION: Caution statements identify conditions or practices that can result in damage to the equipment or other property. -
Page 11: Certifications And Compliances
Changes or modifications not expressly approved by Tektronix can affect emission compliance and could void the user’s authority to operate this equipment. - Page 12 Safety Summaries Laser Safety Laser safety in the United States is regulated by the Center for Devices and Radiological Health (CDRH). The laser safety regulations are published in the “Laser Product Performance Standard,” Code of Federal Regulation (CFR), Title 21, Subchapter J. The International Electrotechnical Commission (IEC) Standard 825, “Radiation of Laser Products, Equipment Classification, Requirements and User’s Guide,”...
-
Page 13: Chapter 1 Introduction
Introduction Scope This is the Installation manual for Tektronix Profile Video File Server model 200 (PDR200) and model 300 (PDR300), see Figure 1-1. The Installation manual provides an overview of the Profile Video File Server and descriptions of the tasks listed below: •... -
Page 14: Related Documentation
Chapter 1 Introduction Related Documentation Profile Family User Manual PDR200 & PDR300 Service Manual Profile Release Notes PDX208 Disk Expansion Chassis Instruction Manual Windows NT Instruction Manual Organization of the Manual The Installation manual is divided into the chapters identified and described below. Chapter 1 - Introduction: This chapter describes the contents of the manual and provides a brief overview of the Profile Video File Server. -
Page 15: Product Description
Many options may be easily added to your PDR 200 as your needs change and expand. For information on adding options, contact your Tektronix representative. A two-channel system (PDR202) is equipped with a single Master Enhanced Disk Recorder board, which provides two JPEG codecs, and two SCSI busses, SCSI A and SCSI B, although SCSI B may not be available on all models. -
Page 16: Front Panel Controls And Indicators
Chapter 1 Introduction Front Panel Controls and Indicators The Profile Video File Server front panel, shown in Figure 1-2, consists of the controls and indicators keyed to Figure 1-2 and briefly described below. Floppy Disk Drive access for loading operating system software or specific application software. -
Page 17: Accessories
Optional accessories are available through Tektronix. Standard Accessories A Profile Video File Server shipment includes the following items: • 1 Manual, Profile Family User (Tektronix part number 071-0230-XX) • 1 Manual, Installation (Tektronix part number 070-9676-XX) • Release Notes (Tektronix part number 061-4150-XX) •... -
Page 18: Optional Accessories
Chapter 1 Introduction Optional Accessories If ordered, Tektronix provides the optional accessories listed below. Contact your nearest field office or distributor for more information. • Ethernet Hub (for Ethernet connections) • Fibre Channel Hub (for Fibre Channel networking) • Optical Media Interface Adapter (copper-to-fiber) for fibre channel networking. -
Page 19: Configurations
Configurations Configurations The Profile Video File Server is available in several factory installed configurations. Table 1-1 lists the available JPEG CODECs, MPEG encoders, and MPEG decoders that are available on each model. Table 1-1. Profile Video File Server Model Descriptions Model Number Number of... -
Page 20: Pdr200 Factory Standard Configurations With Installable Options
Chapter 1 Introduction Table 1-2. PDR200 Factory Standard Configurations with Installable Options Slot PDR202A PDR202D PDR204A PDR204D System CPU System CPU System CPU System CPU Parallel Port Parallel Port Parallel Port Parallel Port System SCSI System SCSI System SCSI System SCSI Audio I/O Audio I/O Audio I/O... -
Page 21: Pdr200 Option Dv Factory Standard Configurations With Other Installable Options
Configurations Table 1-3. PDR200 Option DV Factory Standard Configurations with other Installable Options Slot PDR204A, Opt. DV PDR204D, Opt. DV System CPU System CPU Parallel Port Parallel Port System SCSI System SCSI Audio I/O Audio I/O Digital AES/EBU Digital AES/EBU Video Mixer Video Mixer Video Out... -
Page 22: Pdr304 And Pdr308 Factory Standard Configurations With Installable Options
Chapter 1 Introduction Table 1-4. PDR304 and PDR308 Factory Standard Configurations with Installable Options Slot PDR304A PDR304D PDR308A PDR308D System CPU System CPU System CPU System CPU Parallel Port Parallel Port Parallel Port Parallel Port System SCSI System SCSI System SCSI System SCSI Audio I/O Audio I/O... -
Page 23: Pdr312 And Pdr316 Factory Standard Configurations With Installable Options
Configurations Table 1-5. PDR312 and PDR316 Factory Standard Configurations with Installable Options Slot PDR312A PDR312D PDR316A PDR316D System CPU System CPU System CPU System CPU Parallel Port Parallel Port Parallel Port Parallel Port System SCSI System SCSI System SCSI System SCSI Audio I/O Audio I/O Audio I/O... -
Page 24: Pdr324 Factory Standard Configurations With Installable Options
Chapter 1 Introduction Table 1-6. PDR324 Factory Standard Configurations with Installable Options Slot PDR324A PDR324D System CPU System CPU Parallel Port Parallel Port System SCSI System SCSI Audio I/O Audio I/O Digital AES/EBU Digital AES/EBU Video Mixer Video Mixer Video Out Video Out Picture Monitor (Analog) Picture Monitor (Analog) -
Page 25: Configuration Labels
Configuration Labels Configuration Labels You may check/identify your configuration, including factory installed options, by looking at the bottom panel just below the rear panel board connectors. A configuration label, which identifies the board installed in the slot above the label, has been attached to assist you in making connections to your Profile system. - Page 26 Chapter 1 Introduction 1-14 Profile Video File Server Installation...
-
Page 27: Chapter 2 Mechanical Installation
Chapter Mechanical Installation This chapter describes the mechanical installation of your Profile Video File Server into an equipment rack and the connection of cables to the rear panel. The chapter includes examples of connections to peripheral equipment such as the PDX208 storage expansion chassis, the PRS250 RAID Storage chassis. -
Page 28: Mounting The Slide Tracks In The Rack
Chapter 2 Mechanical Installation Mounting the Slide Tracks in the Rack Figure 2-1 shows the components of a right-hand rack slide set. Note that the chassis sections are already attached to the Profile Video File Server and PAC208/216. When mounting rack slides in the equipment rack, bear the following in mind: •... -
Page 29: Spacing Specification For Mounting Holes In A Rack
Mounting the Slide Tracks in the Rack From Figure 2-2, choose the proper set of rail mounting holes on the rack. Notice that the hole spacing can vary with the rack type. When mounting the slides in racks with EIA spacing, make sure that the slides are attached to the 0.5-inch spaced holes. “UNIVERSAL”... -
Page 30: Front Rail Mounting Detail
Chapter 2 Mechanical Installation Figure 2-3 and Figure 2-4 show front and rear rail mounting details for both deep and shallow racks. Mount the rails using the enclosed hardware. Make sure the stationary sections are horizontally aligned and are level, as well as parallel to each other. BAR NUT (Use if the front rail is not tapped) Figure 2-3. -
Page 31: Mounting The Profile Video File Server
Mounting the Profile Video File Server Mounting the Profile Video File Server In addition to room to make cable connections, the Profile Video File Server requires six inches (15.25 cm) of clearance behind the rear panel for connectors and cable bends. -
Page 32: Making Rack Slide Adjustments
Chapter 2 Mechanical Installation Making Rack Slide Adjustments After installation, binding may occur if the slide tracks are not properly adjusted. To adjust the tracks: 1. Slide the chassis out approximately 10 inches. 2. Slightly loosen the mounting screws holding the tracks to the front of the rails and allow the tracks to seek an unbound position. -
Page 33: Making Rear Panel Connections
Making Rear Panel Connections Making Rear Panel Connections Because of the flexible configurations of the Profile Video File Server, not all of the rear panel connections described here may apply to your Profile system. The connections are described as though all factory installable options were in fact installed. -
Page 34: Connecting The Mouse And Keyboard
Chapter 2 Mechanical Installation Connecting the Mouse and Keyboard The Profile Video File Server provides two sets of connectors for the mouse and keyboard (see Figure 2-7). One set, labelled , is mounted on the Keyboard Mouse upper right corner of the rear panel and the other set resides on the Pentium-based System CPU board in board Slot J1, which is standard on all Profile Video File Server configurations. -
Page 35: Connecting The Reference Genlock
Connecting the Reference Genlock Connecting the Reference Genlock The Profile Video File Server provides a Reference Genlock board, standard on all configurations, with two BNC connectors and a 25-pin DIN connector. The BNC connectors form a bridging, high impedance loop-through for the analog black burst house reference signal. -
Page 36: Connecting Video
Chapter 2 Mechanical Installation Connecting Video The Profile Video File Server supports Serial Digital I/O, Analog Composite I/O, and Analog Component Inputs. The video connections you make depends on your Profile Video File Server configuration. Connecting Serial Digital Video The Profile Video File Server allows Serial Digital Video I/O board installations for two channels of serial digital input and output per board. -
Page 37: Connecting Analog Composite Video I/O
Connecting Video Connecting Analog Composite Video I/O The Profile Video File Server may include one or more an Analog Composite Video In/Output boards. Figure 2-11 shows analog composite video cable connections for a typical location, slot J14. Refer to the rear panel labels or Tables 1-2 through 1-6 in Chapter 1, pages 1-8 through 1-12, to determine the slot location of this board in your system. -
Page 38: Connecting Analog Composite Monitor
Chapter 2 Mechanical Installation Connecting Analog Composite Monitor The Profile Video File Server may include an Analog Composite Monitor board which provides four channels of analog composite video output with time code burn-in and text overlay. With this board you can simultaneously display independent time code of each playback channel on a picture monitor display. -
Page 39: Connecting Analog Composite Video Out
Connecting Video Connecting Analog Composite Video Out The Profile Video File Server may include an Analog Composite Video Out board which provides up to four channels of analog composite video output. The board also has a Monitor D connector which is the Out D video with time code burn-in available. Figure 2-13 shows analog composite video out cable connections for a typical location, slot J6. -
Page 40: Connecting Component Analog Video
Chapter 2 Mechanical Installation Connecting Component Analog Video The Profile Video File Server may include an Component Analog Video In board which accepts a single source of component analog video input. Figure 2-14 shows component analog video in cable connections for a typical location, slot J13. -
Page 41: Connecting Audio
Connecting Audio Connecting Audio Your Profile Video File Server can have one or two Audio I/O boards installed. All units have at least one Audio I/O board, called Audio Signal Processor Board (or ASPB), which provides 16 channels of audio I/O. A second ASPB can be installed, adding 16 more channels for a total of 32 channels of audio I/O. -
Page 42: Connecting 16 Channels Aes/Ebu Digital Audio (Xlr216 Or Bnc216)
Chapter 2 Mechanical Installation The 16 channels supported by the ASPB are divided into four audio groups with four audio channels in each group. The first group consists of channels 1 to 4. The second group consists of channels 5 to 8, and so on up to the fourth group. Audio channels are typically assigned by groups to video channels. -
Page 43: Aspb Connections For 16 Channels Of Aes/Ebu Digital Audio
Connecting Audio ASPB J16 J15 J14 J12 J11 J9 J8 J4 J3 J2 Digital (AES/EBU) AES/EBU 1-16 Channels Spares Monitor XLR216 Audio Panel PROFILE Digital (AES/EBU) 1-16 Channels BNC216 Audio Panel 9676-49 . . . In Out Figure 2-15. ASPB Connections for 16 Channels of AES/EBU Digital Audio 2-17 Profile Video File Server Installation... -
Page 44: Connecting 32 Channels Aes/Ebu Digital Audio (Xlr216 Or Bnc216)
Chapter 2 Mechanical Installation Connecting 32 Channels AES/EBU Digital Audio (XLR216 or BNC216) Figure 2-16 shows AES/EBU digital audio interface connections for a 32 audio channel Profile Video File Server. The 32 channel Profile system has two Audio I/O boards: ASPB1 and ASPB2. ASPB1 is in the lower numbered slot, and ASPB2 is in the higher numbered slot. -
Page 45: Aspb Connections For 32 Channels Of Aes/Ebu Digital Audio
Connecting Audio ASPB2 ASPB1 (Channels 17-32) (Channels 1-16) J16 J15 J14 J12 J11 J9 J8 J4 J3 J2 Digital (AES/EBU) AES/EBU 1-16 Channels Monitor Spares ASPB1 XLR216 Breakout Panel PROFILE Digital (AES/EBU) AES/EBU 17-32 Channels Monitor Spares ASPB2 XLR216 Breakout Panel PROFILE To ASPB1 Digital (AES/EBU) -
Page 46: Connecting 8 Analog And 8 Digital Channels (Pac208)
Chapter 2 Mechanical Installation Connecting 8 Analog and 8 Digital Channels (PAC208) Figure 2-17 shows analog/digital audio connections for a 16 audio channel Profile Video File Server using the PAC208 version of the PAC200 Profile Audio Chassis. The PAC208 chassis allows you to connect eight analog and eight digital (four pairs) audio I/Os to the Profile Video File Server. -
Page 47: Aspb Connections For 8 Analog And 8 Digital Audio Channels
Connecting Audio ASPB J16 J15 J14 J12 J11 J9 J8 J4 J3 J2 Analog Digital (AES/EBU) 9-16 Channels Channels Ref Monitor PAC208 Audio Chassis 9676-50 Figure 2-17. ASPB Connections for 8 Analog and 8 Digital Audio Channels 2-21 Profile Video File Server Installation... -
Page 48: Connecting 16 Analog/Digital Channels (Pac216)
Chapter 2 Mechanical Installation Connecting 16 Analog/Digital Channels (PAC216) Figure 2-18 shows analog/digital audio connections for a 16 audio channel Profile Video File Server using the PAC216 version of the PAC200 Profile Audio Chassis. This Profile system has one ASPB (Audio Signal Processor Board) which provides 16 channels of audio I/O. -
Page 49: Aspb Connections For 16 Analog And 16 Digital Audio Channels
Connecting Audio ASPB J16 J15 J14 J12 J11 J9 J8 J4 J3 J2 Analog Digital (AES/EBU) 9-16 Channels Channels Ref Monitor PAC216 Audio Chassis Analog Digital (AES/EBU) 9-16 Channels Channels Ref Monitor PACXLR Audio Breakout Panel PROFILE 9676-51 Figure 2-18. ASPB Connections for 16 Analog and 16 Digital Audio Channels 2-23 Profile Video File Server Installation... -
Page 50: Connecting 32 Analog/Digital Channels (Pac216)
Chapter 2 Mechanical Installation Connecting 32 Analog/Digital Channels (PAC216) Figure 2-19 shows analog/digital interface connections for a 32 audio channel Profile Video File Server. The 32 channel Profile system has two Audio I/O boards: ASPB1 and ASPB2. ASPB1 is in the lower numbered slot, and ASPB2 is in the higher numbered slot. -
Page 51: Aspb Connections For 32 Analog And 32 Digital Audio Channels
Connecting Audio • Connections on the PAC XLR Audio Breakout Panel are provide for analog audio channels 25-32, each with an In and Out. • Connections on the PAC XLR Audio Breakout Panel are for four pairs of digital audio channels: 25/26, 27/28, 29/30, and 31/32 where each pair has an In and Out. •... -
Page 52: Connecting Scsi Devices
Chapter 2 Mechanical Installation Connecting SCSI Devices The Profile Video File Server has a number of connectors for attaching SCSI devices. There are SCSI connectors on the Master and Slave Enhanced Disk Recorder boards, on the System SCSI board, and along the top of the rear panel (see Figure 2-20). Beyond the Master Enhanced Disk Recorder board, standard on all configurations, the number of SCSI connectors available depends on your configuration. -
Page 53: Example 1: Profile Video File Server To Pdx 208 Disk Expansion Connections
See “Using the Profile Disk Utility” in the Profile Family User Manual. See Figure 2-21 through Figure 2-25 for examples of Tektronix SCSI devices that can be connected to the SCSI connectors on the Master and Slave EDR boards. -
Page 54: Example 2: Profile Video File Server To Two Pdx 208 Disk Expansion Connections
Chapter 2 Mechanical Installation Profile Video File Server J11 J10 First PDX208 Second PDX208 SCSI Cable Terminator 9676-42 Figure 2-22. Example 2: Profile Video File Server to Two PDX 208 Disk Expansion Connections Example 2 (Figure 2-22) shows disk expansion of a Profile system equipped with a Slave EDR. -
Page 55: Example 3: Profile Video File Server To Pls 200 Connections
Connecting SCSI Devices SCSI SCSI Profile Video File Server PLS200 SCSI Cable Terminator SCSI Jumper 9676-44 Figure 2-23. Example 3: Profile Video File Server to PLS 200 Connections Example 3 (Figure 2-23) shows connection of a Profile Library System (PLS200) to a Profile Video File Server equipped with a Slave EDR. -
Page 56: Example 4: Profile Video File Server To Pdx 208 And Pls 200 Connections
Chapter 2 Mechanical Installation SCSI SCSI J11 J10 Profile Video File Server PDX208 PLS200 SCSI Cable Terminator SCSI Jumper 9676-43 Figure 2-24. Example 4: Profile Video File Server to PDX 208 and PLS 200 Connections Example 4 (Figure 2-24) shows disk expansion of a Slave EDR-equipped Profile system and connection to a Profile Library System (PLS200). - Page 57 Connecting SCSI Devices SCSI SCSI Profile Video J11J10 File Server Additional PRS250 PRS250 PLS200 SCSI Cable Terminator SCSI Jumper 9676-41 Figure 2-25. Example 5: Profile Video File Server to Multiple RAIDs and PLS 200 Connections Example 5 (Figure 2-25) shows connection of the Profile Video File Server to two RAID Storage chassis (PRS250) and to a Profile Library System (PLS200).
-
Page 58: Connecting Rs-422 Devices
Chapter 2 Mechanical Installation Connecting RS-422 Devices The Profile Video File Server provides eight RS-422 interface ports through a single connector on the RS-422 Interface board. Attaching the RS-422 Connector Panel to the RS-422 interface board provides eight standard DB9 RS-422 connectors as shown in Figure 2-26. -
Page 59: Connecting Network Devices
Connecting Network Devices Connecting Network Devices The Profile Video File Server supports connection to Ethernet and Fibre Channel networks. Connecting Fibre Channel If the Fibre Channel board is installed, there are a number of ways it may be connected for networking. Profile Video Networking requires both a Fibre Channel network and an Ethernet network. -
Page 60: Making Power Connections
(the neutral conductor). Only the line conductor is fused for over-current protection. Tektronix does not recommend connection to systems that have both current carrying conductors live with respect to ground as power sources, such as phase-to-phase in multi-phase systems. -
Page 61: Power Cord Connector
Making Power Connections Table 2-3. Power Cords for the Profile Video File Server and PAC 208 Power Plug Description Standard 120 V, 3-prong power plug on a 2.5 meter long power cord. For use with common ground systems in North America. Universal European 230V/10A power plug on a 2.5 meter long power cord. - Page 62 Chapter 2 Mechanical Installation 2-36 Profile Video File Server Installation...
-
Page 63: Chapter 3 Starting Your Profile System
Chapter Starting Your Profile System This chapter contains information to get you up and running with your Profile Video File Server. The tasks you will perform are: • Turning Profile system and peripheral equipment On. • Logging On • Configuring your Profile system. •... -
Page 64: Logon As Administrator
Chapter 3 Starting Your Profile System Logon as Administrator When the Profile system is powered On, you may interrupt automatic logon and logon as Administrator. It is not necessary to logon as administrator to configure Profile System software. However, you must logon as Administrator for Windows NT administration and to: - Run the Profile Disk Utility (see the Profile Family User Manual). -
Page 65: Rear Panel Main Power Switch
Turning Power On 6. On the rear panel of the Profile Video File Server (see Figure 3-1), turn the main power switch to (On). 7. On the front panel of the Profile Video File Server (see Figure 3-2), turn the power switch to On. -
Page 66: Turning Power Off
Chapter 3 Starting Your Profile System Turning Power Off To turn your Profile system Off without loss of data, you must: 1. Quit all Profile System Software by selecting from the File menu. Quit Exit 2. Exit or Quit any other processes which may be running in the same way. 3. -
Page 67: System Set-Up
System Set-up System Set-up If you have not interrupted the automatic logon sequence (see “Logging On” on page 3-1), your Profile system will go through its normal self-check and initialization sequence. When completed, the VdrPanel, shown in Figure 3-3, appears on the monitor. -
Page 68: Configuring Your Profile System
Updating an Emergency Repair Disk Whenever you upgrade your software or change your system configuration, Tektronix strongly recommends that you update the emergency repair disk shipped with your Profile system. This will allow you to restore system configuration in the event the operating system has a major problem. -
Page 69: Installation Verification
Profile Error Log.) Initial Power On Checks Tektronix has made every effort to insure that your Profile system was in perfect operating condition before it left the factory. However, unforeseeable problems can occur. The discussion below applies to initial installation only. See the Profile Video File Server Service Manual for any post-installation problems. -
Page 70: Rear Panel Board Indicators
Red LED should be Off. (Goes On at power up and after a few seconds Analog Video goes Off.) If all LEDs are as indicated in Table 3-1, run the diagnostics below. If board LEDs are not as indicated, contact your Tektronix representative. Profile Video File Server Installation... -
Page 71: System Board Diagnostics
System Board Diagnostics System Board Diagnostics Run system board diagnostics if you have a problem and the rear panel LEDs are not as indicated in Table 3-1. To run system board diagnostics: 1. Quit all Profile System Software by selecting from the File menu. - Page 72 Main Diagnostics window. If you have any board failures or any other unresolved installation problems, contact your Tektronix representative. See “Tektronix Product Support” at the front of this manual. 11.Once you have checked all the boards, shutdown and restart Windows NT and then perform “Installation Verification”...
-
Page 73: Chapter 4 Networking Your Profile System
Building a network of more than two Profile systems requires an Ethernet hub (or connections to an existing Ethernet network) and a Fibre Channel hub. In this network configuration, Tektronix recommends that you begin by configuring and testing the network with only two Profile Systems connected to the Ethernet and Fibre Channel hubs. -
Page 74: Networking Several Profile Systems
Chapter 4 Networking Your Profile System Networking Several Profile Systems If you want to connect more than two Profile systems together for video networking, you will need to connect each system to an Ethernet hub or an existing Ethernet network and a Fibre Channel hub. Figure 4-1 shows an example of this configuration. Ethernet Hub Profile1 Fibre Channel Hub... -
Page 75: Point To Point Network Connection
Point to Point Network Connection Profile1 Ethernet Hub 1 Fibre Channel Hub 1 Profile2 Profile3 Profile4 Ethernet Hub 2 Fibre Channel Hub 2 Profile5 Profile6 0033-10 Figure 4-2. Cascading Several Hubs Point to Point Network Connection The simplest network connection is the point-to-point connection shown in Figure 4-3. -
Page 76: Connecting Ethernet
Chapter 4 Networking Your Profile System Connecting Ethernet The Profile system supports an auto switching 10/100BASE-T Ethernet interface. Figure 4-4 shows the location of the 10/100BASE-T Ethernet interface connector on the System CPU board in slot J1. See Appendix B for connector pin-out information. To connect your Profile system to Ethernet: 1. -
Page 77: Configuring Ethernet For Tcp/Ip
Configuring Ethernet for TCP/IP Configuring Ethernet for TCP/IP NOTE: If you are connecting to an existing TCP/IP network, you must contact your network administrator before proceeding with TCP/IP configuration. Please review this procedure with your network administrator before performing it. The following steps assume that you are not connecting to an existing TCP/IP network. -
Page 78: Connecting Fibre Channel
Chapter 4 Networking Your Profile System Connecting Fibre Channel Figure 4-5 shows the connection of several Profile systems to a Fibre Channel Hub using fibre channel cables. See Appendix B for fibre channel board connector pin-out information. Recommended Maximum Fibre Channel cable lengths are: •... -
Page 79: Fibre Channel Board And Hub Connection
Connecting Fibre Channel J16 J15 J14 J12 J11 J4 J3 J2 9676-53 Fibre Channel board Fibre Channel Hub Figure 4-6. Fibre Channel Board and Hub Connection 3. Turn Profile power On. 4. You must now configure the Fibre Channel board for use in your video network environment. - Page 80 Chapter 4 Networking Your Profile System Profile Video File Server Installation...
-
Page 81: Appendix A Specifications
These are not considered to be statements of guaranteed performance and are not ordinarily supported by a performance check procedure. Test Equipment Tektronix uses the following test equipment to verify the performance requirements listed in this chapter. • VM700A •... -
Page 82: Electrical Specifications
Chapter A Electrical Specifications The Performance Requirements listed in the Electrical Specifications apply over an ambient temperature range of +20.5 C to +30.5 C. The Performance Requirement tolerances listed in the Electrical Specification are doubled over the temperature range of 0 to +40.5 C, unless there is a specific exception. Table A-1. - Page 83 Electrical Specifications Table A-2. Analog Composite Video Output Characteristics Description 1 ±1% Program Gain Requirement: 500 kHz to 5.8 MHz ±2% Frequency Response Requirement: Supplemental Data:-3 dB Nominally 6.25 MHz Signal-to-Noise Ratio Requirement: > 50 dB ≤10 ns NTSC Chrominance-to-Luminance Delay Requirement: ≤15 ns PAL Error...
- Page 84 Chapter A Table A-3. Analog Composite Video I/O Characteristics Description Inputs (without TBC) ≥40 dB to 5MHz Return Loss Genlock Locks to (and remain locked) to incoming Black Burst -3 dB to +6 dB from nominal. PAL nominal - Sync @ 300mV; Burst @ 300mV NTSC nominal - Sync @ 40 IRE;...
- Page 85 Electrical Specifications Table A-4. Component Analog Video Input Characteristic Specification Input connectors: BNCx (3) terminating Impedance: 75 ohms ≤ -40dB to 5.0MHz Return loss: Input formats Betacam supported (525/60): Betacam without setup Betacam (non-EBU) MII without setup (SMPTE/EBU-N10) GBR (700mv no setup) Input formats SMPTE/EBU-N 10 supported (625/50):...
-
Page 86: Format Voltage Level Definitions For Cavmtrxn Colorbar Matrix Test Clip
Chapter A Table A-6. Format Voltage Level Definitions for CAVmtrxN Colorbar Matrix Test Clip Format White Yellow Cyan Green Magenta Blue Black SMPTE/EBU-N10 (MII w/o setup) 465.2 308.2 216.8 157.0 59.9 -262.5 88.6 -173.9 173.9 -88.6 262.5 42.7 -262.5 -219.8 219.8 262.5 -42.7... - Page 87 Electrical Specifications Table A-7. Format Voltage Level Definitions for CAVmtrxP Colorbar Matrix Test Clip Format White Yellow Cyan Green Magenta Blue Black SMPTE/EBU-N10 (MII w/o setup) 465.2 308.2 216.8 157.0 59.9 -262.5 88.6 -173.9 173.9 -88.6 262.5 42.7 -262.5 -219.8 219.8 262.5 -42.7...
-
Page 88: Program Input Genlock
Chapter A Table A-8. Program Input Genlock Characteristics Description ±50 Hz at subcarrier Burst Frequency Lock Range Requirement: Supplemental Data:Remains locked or initial lock Signal Amplitude Lock Requirement: Stays locked to +6 dB and -3 dB Range ≤1° Phase Jitter (Analog Input and Requirement: Analog Output) ≤0.5°... -
Page 89: Digital Audio
Electrical Specifications Table A-11. Analog Audio Characteristics Description 1 ±1 dB Through Gain Requirement: Supplemental Data:Non-mix mode each of four channels Frequency Response Requirement: 20 Hz to 20 kHz, with between +0.5 dB, -2 dB maximum deviation from flatness at 48 kHz sample rate Supplemental Data:600 Ω... -
Page 90: Environmental Criteria
Chapter A Table A-14. Profile Video File Server Power Supply Specifications (from Manufacturer) Characteristics Description Output voltages Supplemental Data:+5Vdc @ 70 A max. -5Vdc @ 5 A max. +12Vdc @ 10 A max. +12Vdc @ 6 A max. -12Vdc @ 6A max. Total wattage Supplemental Data:1000 W maximum Supplemental Data:200 mV p-p on + 5V supply... -
Page 91: Mechanical Specifications
Mechanical Specifications Mechanical Specifications Table A-16 lists the dimensions for the Profile Video File Server chassis, the PAC 208/216 chassis, the XLR panels, and the BNC panel. Table A-16. Profile Video File Server Mechanical Specifications Item Dimensions PDR200/PDR300 Height: 8.720 inches (22.149 centimeters) Width: 19.000 inches (48.260 centimeters) Depth: 24.150 inches (61.341 centimeters) PAC208/216... - Page 92 Chapter A A-12 Profile Video File Server Installation...
-
Page 93: S-Vga Connector
Appendix Connector Pin-outs This appendix contains the pin-outs for the connectors at the rear panel of the Profile Video File Server. S-VGA Connector The S-VGA monitor connector on the System CPU board in slot J1 is a high density15-pin female connector. Figure B-1 shows the S-VGA Monitor connector and Table B-1 lists the pin-outs. -
Page 94: Ethernet Connector
Chapter B Ethernet Connector The Ethernet connector located on the System CPU board in slot J1 is an 8-pin RJ-45 snap-in telephone-type connector which supports Category 5 unshielded twisted pair cable. Figure B-2 shows the RJ-45 connector and Table B-2 lists the pin-outs. Pin 8 9676-18 Pin 1... -
Page 95: Parallel Port Connector
Parallel Port Connector Parallel Port Connector Figure B-3. shows the parallel port connector in slot J2 and Table B-3 lists the pin-outs. 9676-61 Figure B-3. Parallel Port Connector Table B-3. Parallel Port Connector Pin-outs Signal Signal STROBE/ AUTO FEED PD(0) ERROR PD(1) INIT... -
Page 96: Rs-232 Connectors
Chapter B RS-232 Connectors The Profile Video File Server has two RS-232 interface connectors on the rear panel. Figure B-4 shows a 9-pin RS-232 rear panel connector (both are male) and Table B-4 lists the pin-outs. Figure B-4. RS-232 Connector Pin-outs Table B-4. -
Page 97: Scsi Connector
SCSI Connector SCSI Connector The Profile Video File Server provides a number of 68-pin SCSI interface connectors at the rear panel, including the one on the SCSI board which is reserved for the PLS200 Library System. For a 2-channel Profile, SCSI interfaces are identified as: SCSI A - Master EDR board rear panel connector SCSI B - Rear Panel connector For a 4-channel Profile, SCSI interfaces are identified as:... -
Page 98: Pin Scsi Connector Pin-Outs
Chapter B Table B-5. 68 pin SCSI Connector Pin-outs Pin # Mnemonic Signal Description Pin # Mnemonic Signal Description DB12 Data Bus bit 12 -DB12 Data Bus bit 12 DB13 Data Bus bit 13 -DB13 Data Bus bit 13 DB14 Data Bus bit 14 -DB14 Data Bus bit 14... -
Page 99: Fibre Channel Connector
Fibre Channel Connector Fibre Channel Connector The Fibre Channel board uses a 9-pin subminiature D-type connector. Figure B-6 shows the connector and Table B-6 lists the pin-outs. Figure B-6. Fibre Channel Connector Table B-6. Fibre Channel Connector Pin-outs Pin # Mnemonic Description Differential Transmit Data IN... -
Page 100: Reference Genlock D-Connector
Chapter B Reference Genlock D-Connector The 25-pin male D connector on the Reference Genlock board provides eight Longitudinal Time Code (LTC) interfaces (four input channels and four output channels). The LTC Breakout cable with a DB25 connector on one end and eight XLR connectors on the other can then be connected to the Reference Genlock 25-pin D connector at the rear panel of the Profile. -
Page 101: Audio Signal Processing Board Connector
Audio Signal Processing Board Connector Audio Signal Processing Board Connector The Audio digital Signal Processor board (ASPB) accepts 16 channels of digital audio input and provides 16 channels of digital audio output via a 80-pin connector on the rear panel. The cable to this connector is from the Profile Audio Chassis or from the XLR/BNC 216 Digital Breakout Box. -
Page 102: Aspb Connector Pin-Outs
Chapter B Table B-8. ASPB Connector Pin-outs Signal Description Signal Description Signal Description Ch 1-2 AES Out (P) Ch 15-16 AES Out (P) Ch 1-2 AES Out (N) Ch 13-14 AES In (P) Ch 15-16 AES Out (N) Chassis Ground Ch 13-14 AES In(N) Ch 1-4 ADC Clock Out (P) Chassis Ground... - Page 103 Index Configurations, system 1-7 Configuring Ethernet for TCP/IP 4-5 Configuring Your Profile 3-6 Connecting AES/EBU Digital Audio 2-16, 2-18 Connecting Analog Composite Monitor 2-12 Accessories 1-5 Connecting Analog Composite Video I/O Optional 1-6 2-11 Standard 1-5 Connecting Analog Composite Video Out AES/EBU Audio Breakout Panel 2-15 2-13 Analog Audio...
- Page 104 Index Reference Genlock Connector B-8 RS-232 Connector B-4 General Information, Specifications A-1 S-VGA Connector B-1 General Safety Summary ix Controls, Front Panel 1-4 house reference signal, connecting 2-9 Diagnostics 3-9 Digital Audio, connecting 2-16, 2-18, 2-20, Indicators, Front Panel 1-4 2-22, 2-24 Initial Power On Checks 3-7 DVCPRO, Circuit Board Location 1-9...
- Page 105 Index Mounting the Profile Video File Server 2-5 Related Documentation 1-2 Mounting the Slide Tracks in the Rack 2-2 RS232 Connector Mounting, Rack 2-1 Connector Pin-outs B-4 Mouse, Connecting 2-8 RS-422 Connector Panel 2-32 MPEG 1-3, 1-7 Connections 2-32 Dip Switch Settings 2-32 RS-422 Devices, Connecting 2-32 Network Configurations 4-1 Network Models 4-1...
- Page 106 Index Time Code A-8 Standard Accessories 1-5 Starting Your Profile See also Automatic Logon 3-1 S-VGA Connector B-1 System Board Diagnostics 3-9 System CPU board 2-8 System Set-up 3-5 Test Equipment A-1 Testing Your Ethernet Connection 4-5 Time Code Specification A-8 Turning Power Off 3-4 Turning Power On 3-2 Updating an Emergency Repair Disk 3-6...
Need help?
Do you have a question about the Profile PDR300 and is the answer not in the manual?
Questions and answers