Touch Panel Operation Overview - Panasonic CQ-VD7005N Operating Instructions Manual

Touch Panel Operation Overview

❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel.
Instructions)
7
Operation
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
Example: CD Changer
Note :
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Source Button
(Content varies with each
source)
Displays the Source Selection Screen.
Source Selection Screen
Source Selection Screen appears.
Touch desired source button.
Touch to quit.
Press [SRC] to change to
desired mode.
Note:
¡ When an ,
this unit without involving the Expansion Module (CY-
EM100N, option), any of them appears at the AV2
position.
8
CQ-VD7005N
(a Operating
The State of Operation Screen
, or is connected to
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
a Failure to observe the above may damage or
break the glass on the surface of the touch panel.
Note:
¡The navigation system (CN-DV2300N, option) is not
operable with the touch panel of this unit.
Menu Button
Displays the Menu Screen.
Menu Screen
Menu Screen appears. Select desired setting.
Menu Setting, (a Operating Instructions)
Press [MENU] to let Menu
Screen appear.
¡ When is selected on the condition that the
Expansion Module is connected to this unit, the video and
audio of the source connected to AUDIO IN/VIDEO IN of
the Expansion Module come out.
Display Button
(a next page)