Panasonic CQ-VD7005N Operating Instructions Manual page 35

Caution
¡Record your registered ID code and keep it in a
secure location. (Fill in the ID code memo
(a page 50).) If you forget it, you will be unable
to use the unit. In case you forget the ID code,
please consult your nearest Panasonic Service
Centre.
MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
: clears the memory to default settings.
YES
NO : no memory clear.
The display returns to the previous one.
OK : proceed.
: no memory clear.
CANCEL
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
appears when
REALLY?
is selected.
YES
OTHER
Other settings
BEEP
(Beep setting)
ON
: operation sound (beep) ON
OFF
: operation sound (beep) OFF
(Setting ACC selection ON and
ACC SELECT
OFF)
ON
: set to ON if your car has ACC position.
OFF
: set to OFF if your car has no ACC posi-
tion.
Note:
¡For a ACC-equipped car, select ON. The following
functions are available.
¡The power is turned on automatically when inserting
a disc or magazine.
selection disables turning on the power of the
¡
OFF
main unit through the remote control.
Caution
¡Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
OFF
ACC
IGN
REMOTE CONTROL
(Remote control setting)
FRONT
: main unit-specific remote control
REAR
: rear monitor (option)-specific remote
control
34
default:
ON
default:
OFF
default:
FRONT
35
CQ-VD7005N