Touch Panel Operation Overview - Panasonic CQ-VW100W Operating Instructions Manual

Touch Panel Operation Overview

❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel.
Operation
11
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
Example: DVD mode
Note :
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Aspect Button
(a page 32)
(only for video source)
Screen Button
(a page 32)
(only for video source)
Sound Button (a
Displays the Source Selection Screen.
Source Selection Screen
Source Selection Screen appears.
Touch desired source button.
Touch to quit.
Press [SRC/PWR] to change to
desired source.
Note :
¡The screen above appears when no external device is
connected to this unit.
12
CQ-VW100W
(a page 41)
The State of Operation Screen
page 33)
Source Button
(Content varies with each source)
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
a
Failure to observe the above may damage or
break the glass on the surface of the touch
panel.
Disc indicator
(Lights when a disc is loaded)
Setup Button
Displays the Setup Screen.
Setup Screen
Setup Screen appears. Select desired setting.
Setup menu, (a page 28)
Prohibition
Input is not possible
because the user has
attempted to perform
an operation which is
not supported by the
disc contents.
Clock time
(a page 30)
(a page 17)