Led Behavior - QNAP QSW-M3212R-8S4T Quick Installation Manual

LED Behavior

Status
Locator
Rst MGMT
1 2 3
1
B
Status
A
Locator Rst MGMT 2
Console
1 2 3
QSW - M3212R-8S4T
1 3 9 11 13 15
10GbE SFP+
B D
A C
2 4 10 12 14 16
10GbE SFP+
4 5
QSW - M3216R-8S8T
3 5 7 9 11 13 15
10GbE SFP+
D B D
C A C
4 6 8 10 12 14 16
10GbE SFP+
4 5
LED
System Status
1
B
Locator
Status
A
Locator 2
Console Rst MGMT
Management port
1 2 3
(Left-speed)
Management port
(Right-link and
activity)
10GbE RJ45
Console
10GbE SFP+
(Left)
10GbE SFP+
(Right)
Status
Green The device is ready.
• The device is being initialized.
• The firmware is being updated.
Flashes Green Note : When updating the firmware, do not remove the power
cord or USB cable, and do not force-exit the application.
• The device is being reset.
Red A fatal device error occurred.
3 5 7 9 11 13 15
10GbE SFP+
Off The device is powered off.
D B D
Indicates the physical location of the switch. The default timer
Flashing Amber is 30 minutes when you are configuring the switch. The locator
LED flashes for 30 minutes when configuring the switch.
C A C
• The switch is cloud management mode.
4 6 8 10 12 14 16
10GbE SFP+
Off
• The switch failed to connect to the cloud.
Green The link speed is operating at 1 Gbps.
Amber The link speed is operating at 100 Mbps.
4 5
Flashes Green
Data is being transmitted.
or Amber
Off There is no network connection.
Amber The port is operating as an uplink port.
Flashes Amber Data is being transmitted.
Off There is no network connection.
Green The link speed is operating at 10 Gbps.
Flashes Green Data is being transmitted.
The link speed is operating at 5 Gbps, 2.5 Gbps, 1Gbps, or
Amber
100Mbps.
Flashes Amber Data is being transmitted.
Off There is no network connection.
Green The link speed is operating at 10 Gbps.
Flashes Green Data is being transmitted.
Off There is no network connection.
Amber The link speed is operating at 1 Gbps.
Flashes Amber Data is being transmitted.
Off There is no network connection.
Description
Console