Table of Contents
Advertisement
26
6.4
To move the bed
WARNING! Before moving The patient is informed.
WARNING! Make sure before moving the bed that the power cord is disconnected
from the mains socket and that it is properly secured so as not to hinder movement.
WARNING! The handling must take place only on rigid flat surfaces and with raised sides.
Always lock the bed at the end of handling.
To move the bed proceed as follows:
▪ ensure that the sides are raised;
▪ remove the power plug and wrap the cable;
▪ release the brakes;
▪ Push or pull the handle by grabbing the headboard or footboard;
▪ at the end of the journey lock the bed.
▪ Make sure the control console has the P magnetic key inserted
6.5
Lock and unlock The bed
The bed is equipped with four rotating wheels braking one with directional lock.
The command positions are:
Position
A:
Three wheels are free, and one directional on the
head side. Position
B:
Position
C:
The wheels are locked.
Place the pedal with one foot to achieve the desired function.
the wheels are free and swivel
t
ID08435 - Rev. 1.2 - 19/04/2023
Advertisement
Table of Contents
