Steering Wheel - MARUTI SUZUKI NEXA GRAND VITARA 2024 Owner's Manual & Service Booklet

INSPECTION AND MAINTENANCE
Parking Brake
"b" "b"
Ratchet tooth specification "b":
4th – 9th
Lever pull force (1):
200 N (20 kg)
Check the parking brake for proper adjust-
ment by counting the number of clicks
made by the ratchet teeth as you slowly
pull up on the parking brake lever to the
point of full engagement. The parking
brake lever should stop between the speci-
fied ratchet teeth and the rear wheels
should be securely locked. If the parking
brake is not properly adjusted or the
brakes drag is suspected even after the
lever has been fully released, have the
parking brake inspected and/or adjusted by
a Maruti Suzuki authorized workshop.
9-21
Brake Discs
76TS90070
Brake location
Front wheels
Rear wheels
If the measured thickness or inner diame-
ter of the most worn part falls below or
exceeds the value indicated above, the
parts should be replaced with a new one.
The measurement involves disassembling
each brake and requires the use of a
micrometer or caliper, which must be done
according to the instructions described in
the relevant service manual or available
from the relevant repair information site.
"a" "a"
"a" "a"
76TS90080
Minimum thickness "a"
20.0 mm
8.0 mm

Steering Wheel

Steering wheel play "c":
–
0 30 mm
Check the free play of the steering wheel
by gently turning it from left to right and
measuring the distance that it moves
before you feel slight resistance. The play
should be between the specified values.
Check that the steering wheel turns easily
and smoothly without rattling by turning it
all the way to the right and to the left while
driving very slowly in an open area. If the
amount of free play is not as specified or
you find anything else to be wrong, an
inspection must be performed by a Maruti
Suzuki authorized workshop.
"c" "c" c c
76TS90090