INSTALLATION
2
2.7 General requirements
INFORMATION!
The following precautions must be taken to ensure reliable installation.
Make sure that there is adequate space to the sides.
•
•
Protect the signal converter from direct sunlight and install a sun shade if necessary.
•
Signal converters installed in control cabinets require adequate cooling, e.g. by fan or heat
exchanger.
Do not expose the signal converter to intense vibration. The flowmeters are tested for a
•
vibration level in accordance with IEC 68-2-64.
2.7.1 Vibration
Figure 2-4: Avoid vibrations
2.7.2 Magnetic field
Figure 2-5: Avoid magnetic fields
10
www.honeywellprocess.com
VERSAFLOW MAG 2000
34-VF-25-64 iss.3 GLO April 18 US