Table of Contents
Advertisement
NOTE: Child lock is activated/deacti-
vated by pressing the Tablet button (5) for
about 3 seconds. When it is activated, all
leds blink and "CL" is shown on the
Remaining Time Indicator (4) once. When it
is deactivated, all leds and "CL" blink twice.
NOTE: If you have used an extra fea-
ture on the latest washing programme, this
feature will remain active also on the next
washing programme. If you want to cancel
this feature on the newly selected washing
programme, press the Half load (6), Tablet
(5) or Delay (3) buttons until the related leds
are off or turn the machine off with the
On/Off button (1) if any washing programme
is not running. Otherwise, if the machine is
running for a washing
programme, it is primarily paused and the
cancellation is performed as explained
above.
7.1. Changing a programme
If you would like to change the programme
when the machine is already running.
After the programme stops, select
your desired programme by pressing
Program Selection button.
Start newly selected programme by
pressing the Start/Pause button.
The new programme will resume
the course of the old programme.
Press the Start/
Pause button.
EN - 21
7.2. Cancelling a programme
If you would like to cancel a programme
when it is running.
Press the Start/Pause
button for 3 seconds.
During cancellation, the End led
blinks. The machine discharges the
water inside it in about 30 seconds.
When the End led turns on,
switch your machine off by
pressing the On/Off button.
7.2.
Switching the Machine Off
Switch your machine off with On/Off button after
the programme has ended and the End led turns
on. Pull the plug out of the outlet. Turn off the
water tap.
NOTE: Do not open the door before the
programme ends.
NOTE: At the end of the washing
programme, you can leave the door of your
machine ajar to hasten the drying.
NOTE: If the door of the machine is
opened or power is cut off during washing,
the programme will continue when the door
is closed or the power is restored.
Advertisement
Table of Contents
