Samsung AR24CSDADWKNCV Service Manual page 44

NO. Parts
4 ASSY CABINET
SIDE RH
5 ASSY CABINET
FRONT
6 ASSY CONTROL
OUT
Procedure
1) Unscrew and remove 11 screws on
Cabinet-side RH. (Use + Screw
Driver)
1) Unscrew and remove 7 screws on
Assy Cabinet Front. (Use + Screw
Driver)
1) Disconnect and Separate 5 Con-
nectors of wire from Assy Control
Out.
2) Separate Comp wire from each
object.
Caution: (When you disconnect
BLDC motor connector you have to
cut the power off first and discon-
nect 30 seconds later And Make sure
that is impossible to connect and
disconnect BLDC motor connector
when the power is on)
3) Unscrew and remove 2 screws on
of Assy Control out.
44
Remark