Advertisement
•
When disconnecting the kettle from the mains socket, always pull the plug, not the
power cord. Otherwise, damage to the power cord or the socket could occur.
•
A connected power outlet must be easily accessible for possible sudden disconnection.
Before connecting your appliance to a power outlet and turning it on, make sure it's fully
and correctly assembled. Follow the instructions provided in this user's manual.
•
Do not wash the kettle, base, mains cord and plug under running water and do not
immerse them in water or any other liquid.
•
Do not use rough abrasive or caustic detergents to clean the appliance.
•
Keep both inner and outer surface of the appliance clean. Follow the cleaning
instructions provided in this user's manual.
•
Do not store or use any explosive and/or flammable substances inside or in the vicinity of
this appliance, such as flammable gas sprays.
IMPORTANT SAFETY INSTRUCTIONS FOR USING ELECTRICAL EQUIPMENT
•
Fully unwind the power cord before use.
•
Do not leave the power cord hanging over the edge of a table or counter top or allow it
to touch a hot surface or to become tangled up. Do not put heavy objects on the power
cord.
•
For safety reasons, we recommend connecting the appliance in an independent electrical
circuit separated from other appliances. Do not use adapter plugs or extension cables to
connect the appliance to a power socket.
•
To prevent electric shock, do not immerse the appliance, its base or the power cord in
water or other liquids.
•
We recommend that you inspect the appliance regularly. Do not use the appliance if it is
damaged in any way or if the power cord or plug is defective. All repairs or adjustments
must be performed at the nearest Catler authorised service centre.
•
Any maintenance other than standard cleaning must be performed at authorised Catler
service centre.
•
We recommend to install a residual current device (standard safety switches in your
power outlet) to provide a higher level of protection when using the appliance.
We recommend to install a residual current device (with a nominal residual operating
current of no more than 30mA) in the electric circuit in which your appliance is to be
connected. For further expert advise, please contact your electrician.
Instructions are also available at www.catler.eu.
8
CATLER RECOMMENDS SAFETY FIRST
Advertisement
