Advertisement
CARE AND CLEANING
Before cleaning the appliance, always
disconnect the plug of the power cord from
the mains socket and let it to cool down
properly.
WARNING!
DO NOT SPLASH WATER OR
ANY OTHER LIQUID ONTO
THE KETTLE OR ANY OF ITS PARTS OR
ACCESSORIES.
DO NOT WASH THE KETTLE, BASE,
MAINS CORD AND PLUG UNDER
RUNNING WATER AND DO NOT
IMMERSE THEM IN WATER OR ANY
OTHER LIQUID.
NOTE:
Do not use sharp objects, chemicals,
thinners, petrol or other similar
substances. Under no circumstances
should the kettle be cleaned with
a steam cleaner.
CLEANING THE OUTER CASE OF
THE KETTLE
To clean the kettle's outer surface, please use
a damp cloth; to polish, use a dry cloth.
NOTE:
The base heating element is made
of high grade stainless steel. Brown
stains that may appear during use
are mineral deposits from the boiled
water. This is no corrosion in any case.
12
CARE AND CLEANING
REMOVING MINERAL DEPOSITS
Tapped water may contain minerals that may
deposit inside the kettle and water gauge
and lead to colouration after some time.
To remove the deposits, proceed as follows:
Fill your kettle to 2/3 of its level with
1 portion of vinegar and 2 portions of water.
Let the solution come to the boil and let it
stand in the kettle.
Empty your kettle and then boil clean water
twice. The kettle is then ready for further use.
STORAGE
Before storage, make sure that the kettle is
turned off, clean and dry. Check that the lid
is closed properly. Wrap the cord around
the bottom of the base. Store your kettle in
a vertical position and never put anything on
the lid.
Advertisement
