To Operate The Wireless Remote Control; Before Operation; To Mount The Wireless Remote Control Holder; To Insert The Batteries - Daikin FTXP20N5V1B9 Operation Manual

4 Before operation

Icon
Operation mode = Cooling
Operation mode = Fan only
Powerful operation is active
Econo operation is active
The indoor unit receives a signal from the wireless
remote control
Current temperature setting
Airflow rate = Automatic
Airflow rate = Indoor unit quiet
Airflow rate = High
Airflow rate = Medium high
Airflow rate = Medium
Airflow rate = Medium low
Airflow rate = Low
Comfort operation is active
Automatic vertical swing is active
Automatic horizontal swing is active
ON timer is active
OFF timer is active
3.2.3

To operate the wireless remote control

a Infrared signal receiver
1 Aim the signal transmitter at the infrared signal receiver on the
indoor unit (maximum distance for communication is 7 m).
Result: When the indoor unit receives a signal from the wireless
remote control, you will hear a sound:
Sound
Beep-beep
Beep
Long beep
Operation manual
6
Description
a
Description
Operation starts.
Setting changes.
Operation stops.
4 Before operation
4.1 To mount the wireless remote
control holder
2×
a b c
a Wireless remote control
b Screws (field supply)
c Wireless remote control holder
1 Choose a place where the signals reach the unit.
2 Attach the holder with screws to the wall or a similar location.
3 Hang the wireless remote control on the holder.
4.2

To insert the batteries

The batteries will last for about 1 year.
1 Remove the back cover.
2 Insert both batteries at once.
3 Put the cover back.
1 3
2
AAA.LR03
4.3

To turn on the power supply

1 Turn the circuit breaker on.
Result: The flap of the indoor unit will open and close to set the
reference position.
5

Operation

5.1

Operation range

Use the system in the following temperature and humidity ranges for
safe and effective operation.
Operation mode
(a)(b)
Cooling ▪ Outdoor temperature: –10~48°C DB
▪ Indoor temperature: 18~32°C DB
▪ Indoor humidity: ≤80%
(a)
Heating ▪ Outdoor temperature: –15~24°C DB
▪ Indoor temperature: 10~30°C DB
(a)
Drying ▪ Outdoor temperature: –10~48°C DB
▪ Indoor temperature: 18~32°C DB
▪ Indoor humidity: ≤80%
(a)
A safety device might stop the operation of the system if the unit
runs outside its operation range.
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Operation range
R32 Split series
3P717028-5D – 2023.08