Remote Control - Ferguson Ariva 220 Combo User Manual

4. Remote control

Due to the standardization of Ferguson equipment, the majority of these devices use the same
remote control unit, i.e. RCU640. This means that not all keys are used by this equipment
model!! The universal 4-in-1 RCU640 remote control unit can be used to operate any television
set (TV), Ferguson satellite receivers (STB), the Ferguson AV-770 amplituner (AMP), and
Ferguson DVD players (DVD). The remote control can operate nearly all basic TV functions. The
TV button is used to programme, and subsequently operate the television set. By default, no
television set is programmed. The STB, AMP and DVD buttons may be used to operate the
pertinent device - only the factory set devices may be operated (i.e. others cannot be
programmed). The red symbols are for DVD or amplituner (AMP) functions.
POWER Turns the receiver on and sets it in standby mode.
MUTE Switches the sound on and off.
STB, TV, AMP, Used to select the device that is to be operated. STB – satellite receiver, TV –
DVD television, AMP – Ferguson amplituner, DVD – Ferguson DVD player
BACK Returns to the previously displayed channel.
EPG Displays the electronic programme guide.
MENU Displays the main menu on-screen.
OPT Used to switch between the resolution selected in the menu and the default
resolution of 576i. Allows the user to restore proper functioning of the receiver
following the selection of a resolution not supported by the television.
USB/PVR Displays the USB menu, if a USB memory device has been connected.
FAV Displays a selection of favorite channel lists.
VOL+ VOL– Used to change the volume level (lower, higher).
CH+ CH– Switches to the next or previous channel.
INFO Displays information about the current programme.
EXIT Returns to the previous submenu, or exits the menu.
TEXT Switches on the teletext on-screen, if this is available.
AUDIO Switching between soundtrack versions, if these are available.
SUBTITLE Switches the on-screen captions on and off, if these are available.
FIND A quick search for channels according to successive name letters.
EDIT Not used.
TV/STB Used for controlling the SCART bush. Cyclic selection of signal sources.
FORMAT Change the aspect ratio of 16:9, 4:3, etc..
PIP Not used.
REV, PLAY, Buttons used to operate the recording, playback and time shift mode functions.
PAUSE, FF,
STOP, REC
SAT Changes the active satellite for the channel list.
TV/RADIO Switching between the list of television and radio programmes.
8