Hisense PureFlat RF22B3FSE Operation Manual page 12

Installing your new appliance
5. Take out the lower drawer(5) by lifting
it up.
6. Remove the 2 screws(6) holding the
support with Phillips(+) screwdriver.
7. Remove the freezer door by lifting it
up.
5
6
6
Re-assemlbing the doors
To reattach the doors and drawers after
you moved the appliance to its final
location, assemble the parts in reverse
order.
Installing the water lines
In order for the ice maker to operate
properly, a water line is required. You
may need to purchase a water
purifying system to do that. The water
connection must be made by a
qualified plumber. If the refrigerator is
installed in an area with low water
pressure (below 30psi/207KPa), you can
install a booster pump to compensate
for the low pressure.
-the maximum inlet water pressure is
700kPa;
-the minimum inlet water pressure is
207kPa.
10