Hisense PureFlat RF22B3FSE Operation Manual page 18

Display controls
Note:
Once the appliance is powered on, all icons on the display panel will be lit for
3 seconds with a buzzer sound.
All the icons will go off on the condition of all keys untouched and all doors
closed for one minute.
The control panel will light up when the door is open or you touch any button.
Setting the refrigerator running at high temperature will accelerate food
decomposition. For optimum food preservation, we recommend that when
starting the refrigerator for the first time, the temperature of fridge is set to
39°F (4°C), and that of the freezer to 0°F (-18°C).
Caution!
The temperature only means the average temperature of the whole
refrigerator cabinet. Temperatures inside each compartment may vary from
those displayed on the panel, depending on how much food stored and
where the refrigerator is placed. In addition, the actual temperature from
higher room and lower room will be different.
"Switching Celsius and
Fahrenheit"
1. Press " " or "
Celsius/Fahrenheit Indicator "
blinks.
2. Press the Confirm Control "
first time, and " " or "
on. After that, each time you press the
Confirm Control "
will be switched between °C and °F, and
the temperature setting value of the
corresponding unit will be displayed in
the temperature area.
" repeatedly until the
" or "
" for the
" will be always
", the temperature
Note
"Fridge temperature control"
1. Press " " or " " repeatedly until the
" Fridge icon "
2. Press the Confirm Control "
first time, and the Fridge icon "
always on. After that, press the Confirm
Control " " repeatedly to cycle
through the available temperature
settings, from 8°C to 2°C if you have
set temperature type to Celsius.
8°C- 7C- 6C- 5°C
" blinks.
" for the
2°C - 3°C -4°C
" will be
16