Operation - pro user RVC3110 Manual

OPERATION

The monitor will automatically turn on when the vehicle is in reverse gear.
There are 4 control buttons available for users to have their controls:
Power button
Press the POWER button to supply power to the monitor. When the monitor image is on,
the blue LED will be lit. If there is power to the monitor, but the monitor image is OFF,
the blue LED will blink on and off. When the monitor power is off, no picture can appear
on the screen and the blue LED will be off.
Brightness button
There are 10 levels of brightness. To adjust the brightness, press the Brightness Control
button. Pressing the button to increase the brightness at the highest level will return to
the lowest level.
Contrast button
There are 10 levels of contrast. To adjust the contrast, press the Contrast Control button.
Pressing the button to increase the contrast at the highest level will return to the lowest
level.
Image Orientation buttons
Press these buttons to reverse the angle of the camera.
Brightness button
Contrast button
Image orientation buttons
Power button
7