Advertisement
Photon 300D Installation &
Guide
To install the Photon 300D and get started
1. Connect power.
2. Connect the Photon 300D to the network.
3. Access the Photon 300D.
4. Change the management configuration
5. Access the Stellar Cyber UI.
Connecting Power
To connect power to the appliance:
To connect power to the appliance:
1. Connect the included power cable
Connect the included power cables to the power source.
2. Connect the power cables to the
3. Press the power button on the
Connecting to the Network
Connecting to the Network
To connect the Photon 300D to the network:
1. Connect the Management port
2. Use the monitor ports to connect to
ports to connect to data sources (mirror ports or taps). There are four 1
GbE monitor ports (eth2...eth5, from left to right)
left to right).
Installation & Quick Start
and get started:
to the network.
configuration.
to the rear of the Photon 300D.
on the front of the Photon 300D.
to the network:
port to a network accessible by the DP.
(eth2...eth5, from left to right) and 2 10GbE monitor ports
Stellar Cyber, 2023. All rights reserved.
Quick Start
There are four 1
ports (eth6...eth7,
January, 2023
Advertisement
Table of Contents
Related Manuals for Stellar Cyber Photon 300D
Summary of Contents for Stellar Cyber Photon 300D
- Page 1 January, 2023 Photon 300D Installation & Installation & Quick Start Quick Start Guide To install the Photon 300D and get started and get started: 1. Connect power. 2. Connect the Photon 300D to the network. to the network. 3. Access the Photon 300D.
- Page 2 Photon 300D Installation & Quick Start Accessing the Photon 300D You can access the appliance using a VGA monitor and USB keyboard, using SSH to the Management port, or using a virtual console over the iDRAC port. The ports for these connections are all at the rear of the appliance, as illustrated above.
- Page 3 7. Set the host name, which is displayed in Stellar Cyber and should be unique for each sensor: set hostname <new hostname> 8. If necessary, set the proxy HTTP server: set proxy http://<proxy IP address:port>...
Need help?
Do you have a question about the Photon 300D and is the answer not in the manual?
Questions and answers