Crest Audio Stereo Amplifier Owner's Manual page 20

Crest audio, inc stereo amplifier user manual
Table of Contents

Advertisement

Appendix B - General Amplifier Specifications (Model 4601)
Max RMS Output Voltage
Peak Output Voltage
Frequency Response
Power Bandwidth
THD+N
SMPTE IMD
(rated power at 8Ω, 60Hz & 7kHz)
Damping Factor
Input Sensitivity
Hum and Noise
Crosstalk
Input Connectors
Output Connectors
Standard Power Supply
1/8 Power Curr. Draw
1/3 Power Curr. Draw
Max Curr. Draw
Thermal Emissions
Thermal Emissions
Dimensions
† USA, Canada, U.K., and many other countries. Power figures are watts per channel, both channels driven. Crest Audio reserves the right
to make improvements in manufacturing or design which may affect specifications. Crest Audio specification literature is available in
downloadable PDF file format; visit our website at http://www.crestaudio.com. ©1997 Crest Audio Inc. 12/15/97
Appendix B
8Ω Stereo Power
4Ω Stereo Power
8Ω Bridged Mono Power
(each channel)
(each channel)
(+0 / -0.3dB, 1W/8Ω)
(rated power at 4Ω, 1% THD+N)
Protection Circuitry
(rated power at 4Ω, 1kHz)
(10-400Hz at 8Ω)
Input CMRR
(1kHz)
(rated power at 4Ω )
Voltage Gain
Input Impedance
(balanced)
("A" weighted, full power, 4Ω)
("A" weighted, full power, 4Ω)
Class
(per channel)
(per channel)
Filter Storage
(USA)
Idle Current Draw
(120V)
(typical music, 120V/4Ω)
(continuous music, 120V/4Ω)
(circuit breaker rating, 120V/4Ω)
(1/8 Power, 4Ω)
(1/3 Power, 4Ω)
Cooling
Controls
LED Indicators
(per channel)
Construction
(Height x Width x Depth)
Gross Weight, Net Weight
Warranty
1kHz, <0.012% THD+N
350W
485W
925W
59V
83.4V
20 Hz-20 kHz, -3dB @ 53kHz
20 Hz-20 kHz, +0/-0.2dB
Clip Limit, IGM, AutoRamp, High Temp, short-circuit,
DC voltage, turn-on/off transient, sub/ultrasonic input.
<0.012%
<0.1%
400:1
>60 dB
1.03V RMS
X40
>20kΩ
> -100 dB
> -60dB
AB
Female XLR (pin 3+), Octal Socket
5-way output binding posts
40,800 µF
120V, 60Hz
1.1A
7.3A
11.1A
18.0A
2576 BTU/hr
3443 BTU/hr
Rear to front tunnel heatsink, 2 variable speed DC fans
Front panel: 2 attenuators, circuit breaker/power switch;
Rear panel: mode switch, signal ground lift jumper.
Clip/Limit, Signal, Temp/DC, Active
16 ga. single piece steel chassis, .187" (5mm) alum. front panel
3.5"x19"x15" (16" to rear ears)
89mm x 483mm x 381mm (406mm to rear ears)
48.0 lbs (21.79 kg.), 43.0 lbs (19.52 kg.)
5 years, parts and labor†
20Hz-20kHz, <0.05% THD+N
300W
425W
825W
Crest Audio Pro Series Power Amplifiers

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro seriesPro series 8001

Table of Contents