KEEWAY K-LIGHT 125 Owner's Manual And Warranty page 189

After cleaning
1. Dry the motorcycle with an absorbing
cloth.
2. Immediately dry the drive chain and
lubricate it to prevent it from rusting.
3. Use a chrome polish to shine chrome,
aluminium and stainless-steel parts,
including the exhaust system (even
the thermally induced discolouring of
stainless- steel exhaust systems can be
removed through polishing.)
4. To prevent corrosion, it is recommend-
ed to apply a corrosion protection
spray on all metal, including chrome
and nickel plated, surfaces.
5. Use spray oil as a universal cleaner to
remove any remaining dirt.
6. Touch up minor paint damage caused
by stones, etc.
7. Wax all painted surfaces.
8. Let the motorcycle dry completely be-
fore storing or covering it.
WARNING
Contaminants on the brakes or tyres
can cause loss of control.
• Make sure that there is no oil or
wax on the brakes or tyres.
• If necessary, clean the brake discs
and brake linings with a regular
brake disc cleaner or acetone, and
wash the tyres with warm water
and a mild detergent. Before rid-
ing at higher speeds, test the mo-
torcycle's braking performance
and cornering behaviour.
7-3
Motorcycle care and storage
NOTICE
• Apply spray oil and wax sparing-
ly and make sure to wipe o any
excess.
• Never apply oil or wax to any rub-
ber and plastic parts, but treat
them with a suitable care product.
• Avoid using abrasive polishing
compounds as they will wear
away the paint.
TIP
• Consult a Keeway dealer for advice on
what products to use.
• Washing, rainy weather or humid cli-
mates can cause the headlight lens to
fog. Turning the headlight on for a short
period of time will help remove the
moisture from the lens.
EN
7