LG XD3A25UPS Owner's Manual page 29

• When the rinse aid is empty, this option is
selected automatically.
Delay Start
This feature delays the start of a selected cycle.
Each time the Delay Start button is pressed, the
delay time increases by an hour. The delay time can
be set from 1 to 12 hours, in one-hour increments.
• To cancel this feature, turn the power off.
• To change the cycle and cycle option, open the
door and then select another cycle and cycle
option. The countdown will continue.
Control Lock
This feature helps prevent settings from being
changed during a cycle. Selecting this feature locks
all of the buttons, except for the Power button, on
the control panel. This feature does not lock the
door.
• On models with the external display, while a
cycle is running, press and hold Half Load and
Energy Saver simultaneously for 3 seconds to
activate or deactivate this feature. On models
with a concealed display, open the door during
operation and follow the same instruction.
• When this feature is activated, the display code
will show on the display.
CL
• To start a new cycle, deactivate this feature.
• This feature can be set at any time by turning on
the appliance.
Wi-Fi
Press and hold Delay Start for 3 seconds to
connect to the network. Refer to SMART
FUNCTIONS sections for detailed information
about this feature.
Auto Open Dry
This feature may vary depending on the model
purchased.
The Auto Open Dry feature enhances the drying
performance by opening the door automatically
during the drying stage within the displayed
program time. For optimum drying results wait
until the program ends before unloading the
dishwasher. The program is fully complete when
the display shows "End". The door opening time
varies depending on the program selected.
• To activate or deactivate this feature, press and
hold the Energy Saver button and the Hi-Temp.
button simultaneously for 3 seconds.
• This feature is not available when the Machine
Clean and Rinse cycle is selected.
• When you select the Download Cycle, this
feature may operate even if the feature is
deactivated. Because the Download Cycle is
designed to achieve the best results in a specific
purpose regardless of appliance settings.
• The display shows whether this feature is on or
off.
WARNING
• Keep children away from the appliance while the
appliance is operating. Exposure to high
temperature steam may cause scalding or
burns.
SignaLight™
This feature may vary depending on the model
purchased.
SignaLight™ shows the status of the appliance,
whether it has encountered any problems,
whether it is operating normally, or whether it is
ready to wash dishes.
• Depending on the model, the lamp may be
located either on the front of the appliance or
the top of the door.
OPERATION
29