Table of Contents
Advertisement
Next steps
1. Install the
display
assembly.
2. Install the
wireless
card.
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
Display bezel
Removing the display bezel
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
This procedure is applicable for systems shipped with a plastic chassis only.
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
hinge
caps.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
94
Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
