Table of Contents
Advertisement
Remove the pull-out rail.
4.
Clean the pull-out rail.
5.
→ "Cleaning products", Page 18
18.4 Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
Insert the pull-out rail between the two bars.
1.
19 Appliance door
To ensure that your appliance retains its appearance
and remains fully functioning for a long time, you can
detach the appliance door and clean it.
19.1 Detaching the appliance door
WARNING ‒ Risk of injury!
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Push the retainer
2.
upper bar.
Keep the PUSH tab pushed in
3.
out rail inwards until the front retainer
between the two bars
Release the PUSH tab.
‒
a The retainer
clicks into place.
Pull the pull-out rail out as far as it will go and slide
4.
it back in.
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Open the appliance door fully and push in the direc-
1.
tion of the appliance.
Appliance door en
in between the lower and the
and swing the pull-
is located
.
23
Advertisement
Table of Contents
