Table of Contents
Advertisement
Play Back your Recordings in your VCR
Playback using the PlayPak
Remove the Battery Compartment lid
and insert the AA size battery.
+ Make sure polarities are aligned properly.
* When tape loading and unloading time
becomes longer than normal, battery replace-
ment is necessary.
1 Turn the Tape Wheel on the [VISTA
cassette in the direction of the
arrow to take up any slack.
2 Slide the RELEASE button in the
direction of the arrow to open the
PlayPak door.
g)
£n
o
O
O
po
(o
=
t
zt.
O
=
3 Insert the
cassette with the
window facing up and to the left.
Then, snap the lid shut.
* Be sure the cassette reel area under the
PlayPak is free to turn while loading.
* Allow the Load Detector to fully retract
before using the PlayPak in your standard
VHS VCR.
I Slide the RELEASE button and wait
for the lid to open.
2 Hold the PlayPak securely in one
hand. Using your finger, reach through
the hole in the bottom of the PlayPak
Adaptor and push the tape out the top.
27
Advertisement
Table of Contents
