Table of Contents
Advertisement
MEMORY
When the linear time counter with memory indi¬
cation appears in the viewfinder or LCD monitor,
a tape that is being rewound automatically stops
when
the
counter
reads
approximately
"0:00:00M". This is useful if there is a section of
tape you want to review immediately after
recording or if you want to return to the same
point several times in a row.
1. Start playing or recording a tape.
2. At the point you want playback to start, press
COUNTER RESET button on the remote con¬
trol to reset the counter to "0:00:00M".
3. Continue to play or record.
4. Press the STOP button to stop playback, or
press the Start/Stop button to stop recording
and
set the
CAM/OFF/VIDEO
switch
to
"VIDEO".
5. Press the DISPLAY button on the remote con¬
trol until the linear time counter with memory
is displayed.
6. Press the REW/REVIEW button. The tape will
be rewound to the preselected point, at
approximately "0:00:00M" indication.
WIRELESS REMOTE CONTROL
You can operate the camera/recorder with the wireless remote control (provided) from a distance.
The buttons on the remote control except for AA/ DUB, DISPLAY, COUNTER RESET and TITLE ON/OFF
have the same functions as the buttons with the same identifications on the camera/recorder.
Aim the remote control at the receiver of the camera/recorder.
■ Remote controllable range
Cautions on the remote control
•
Use the remote control indoors. When the infrared ray receiver is exposed to direct sunlight or strong
light such as that from artificial lighting, the remote control may not operate correctly.
• The remote control cannot be operated if there is an obstacle between the remote control and infrared
ray receiver.
• The remote control code of this camera/recorder is "VCR2". If the remote control code of your VCR
is the same, "VCR2", your VCR may malfunction when this remote control is used.
NOTE:
The tape will also stop approximately at
"0:00:00M" during fast forward mode.
31
Advertisement
Table of Contents
